![background image](http://html1.mh-extra.com/html/mercury-security/ms-ics/ms-ics_installations-and-specifications_1773724001.webp)
Mercury Security © 2017
MS-ICS
DOC 10107-0053
REV 1.02
Page 1
www.mercury-security.com
2355 MIRA MAR AVE. LONG BEACH, CA 90815-1755, (562)986-9105 FAX (562) 986-9205
MS-ICS
Intelligent Controller
Installation and Specifications:
1. General
The MS-ICS is part of Mercury Security's bridging hardware technology for replacing the Software House GCM
module. The MS-ICS intelligent controller provides decision making, event reporting, and database storage for
the Mercury hardware platform.
The MS-ICS communicates with the host via on-board 10-BaseT/100Base-TX Ethernet port. An alternate host
10-BaseT/100Base-TX communication connection is available by use of the optional Lantronix Micro125
interface daughter board.
The MS-ICS connects to the MS-ACS processor via a 34-pin ribbon cable, up to two MS-ACS are supported.
Standard Mercury remote serial I/O panels may be connected to the external 2-wire RS-485 multi-drop
communication bus.
MS-ICS
J5
1
4
3
2
S1
^|
ON
D7
1 2 3 4 5 6
J8
TR+
TR-
GND
TB2
4
1
BATTERY: BR/CR2330
REPLACE ANNUALLY
GND
TMP
GND
PFL
GND
BAT
TB1
6
1
BT1 3V
CR/BR2330
S2
J4
J2
+12VDC
J1
1
1.75 [44.55]
6.11 [155.19]
8.58 [218.01]
J5: CONNECTION FOR
LANTRONIX MICRO125
ETHERNET MODULE
(PORT 1)
STANDOFF FOR LANTRONIX MICRO125
ETHERNET MODULE: DIAMETER
0.125" X 7/16", 3 REQUIRED
RICHCO, INC. P/N LMSP-7-01
Ø.156
4 PLACES
J2: INPUT
POWER
12VDC
4.91
[124.71]
5.83
[148.01]
STATUS
LEDs
DIP
SWITCH
EARTH
GROUND
J1: TO MS-ACS
J4: ETHERNET
JACK
TB2: TO
REMOTE
MODULES
.46 [11.56]
MS-ICS
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.