Merco RT-2AR, Parts & Service Manual

Page: 1 / 8

DESCRIPTION Part# Qty
Inf Control 208V 14702 2
Inf Control 240V 12355 2
Knob Inf Control 12919 2
Element upper 890W 208V * 21103 2
Element upper 890W 240V * 21105 2
Element assy lower 208V 12618 1
Element assy lower 240V 12620 1
Element lower 1200W 208V * 12126 2
Element lower 1185W 240V * 21103 1
Element assy upper 208V 12254 1
Element assy upper 240V 12266 1
Motor 208/240V 22743 1
Speed control 208/240V 21842 1
Switch, toggle DPST 20a 68117 1
Knob, speed control 12447 1
DESCRIPTION Part# Qty
Cordset, 6-30P 21221 1
Light Pilot 208/240V 51070 2
Bearings 22754 4
Wire harness kit(wires only) 12933 1
Jumper 21358 4
Terminal block 21858 1
Drive chain 54 links 12412 1
32T sprocket assy 21319 1
8T sprocket asst 30494 1
Front trim, left side 12219 1
Legs 1” plastic 12668 4
Control panel 12060 1
Control panel decal 12061 1
Savory logo 12523 1
Savory lubricant 21720 1
PARTS & SERVICE MANUAL for RT-2AR
“Adjustable Range” Toaster
The information found in this Manual
will prove very helpful. Although the
instructions are easy to follow, all
repair procedures should be carried
out by a qualified Merco/Savory
Certified Service Representative.
The RT-2AR should be placed in the
most convenient location for ease of
cleaning, maintenance, service and
general operation. Careful consider-
ation should be given to avoid drafts,
close proximity to grease or vapor-
producing appliances or high ambient
heat equipment. Minimum of ½”
clearance is required for air circula-
tion. This is assured by the rounded
“acorn” nuts protuding from the sides
and rear. Overhead clearance from the
top of the toaster should be as much
as possible and sufficient to allow heat
dissipation.
05-02kdl 07155