![background image](http://html1.mh-extra.com/html/mayr/roba-brake-checker-plus-dc-028-600-2/roba-brake-checker-plus-dc-028-600-2_installation-and-operational-instructions_1747478001.webp)
Installation and Operational Instructions for
ROBA
®
-brake-checker plus DC Type 028.600.2
(B.0286002.EN)
your reliable partner
02/10/2018 TF/GF
Page 1 of 10
Chr. Mayr GmbH + Co. KG
Eichenstraße 1, D-87665 Mauerstetten, Germany
Tel.: +49 8341 804-0, Fax: +49 8341 804-421
www.mayr.com
, E-Mail:
11
Guidelines on the Declaration of Conformity
A conformity evaluation has been carried out for the product in terms of the EU Low Voltage Directive 2014/35/EU and the
Electromagnetic Compatibility (EMC) Directive 2014/30/EU. The Declaration of Conformity is laid out in writing in a separate
document and can be requested if required.
Guidelines on the EMC Directive (2014/30/EU)
The product cannot be operated independently according to the EMC directive.
Only after integration of the product into an overall system can this be evaluated in terms of the EMC.
For electronic equipment, the evaluation has been verified for the individual product in laboratory conditions, but not in the
overall system.
Guidelines on the Machinery Directive (2006/42/EC)
The product is a component for installation into machines according to the Machinery Directive 2006/42/EC.
The product can fulfil the specifications for safety-related applications in coordination with other elements.
The type and scope of the required measures result from the machine risk analysis.
The product then becomes a machine component and the machine manufacturer assesses the conformity of the safety
device to the directive. It is forbidden to start use of the product until you have ensured that the machine accords with the
regulations stated in the directive.
Guidelines on the ATEX Directive
Without a conformity evaluation, this product is not suitable for use in areas where there is a high danger of explosion. For
application of this product in areas where there is a high danger of explosion, it must be classified and marked according
to Directive 2014/34/EU.
Safety and Guideline Signs
DANGER
Immediate and impending danger, which can
lead to severe physical injuries or to death.
CAUTION
Danger of injury to personnel and damage to
machines.
Guidelines on important points.
General Safety Guidelines
DANGER
Danger of death! Do not touch voltage-carrying
lines and components.
DANGER
Danger of burns when touching hot surfaces.
CAUTION
• Danger of device failures caused by short-
circuits and earth short-circuits at the
terminals
• Electronic devices cannot be guaranteed fail-
safe.
During the risk assessment required when designing the machine or
system, the dangers involved must be evaluated and removed by
taking appropriate protective measures.
To prevent injury or damage, only professionals and specialists
are allowed to work on the devices. They must be familiar with the
dimensioning, transport, installation, initial operation, maintenance
and disposal according to the relevant standards and regulations.
Before product installation and initial operation,
please read the Installation and Operational
Instructions carefully and observe the Safety
Regulations. Incorrect operation can cause injury
or damage.
General Safety Guidelines
Only carry out installation, maintenance and
repairs in a de-energised, disengaged
state and secure the system against inadvertent
switch-on.
11