SPC70
SOUND LEVEL CALIBRATOR
I
NSTRUCTION
M
ANUAL
ALWAYS READ THESE INSTRUCTIONS BEFORE PROCEEDING
Thank you for buying one of our products. For safety and a full
understanding of its benefits please read this manual before use.
Technical support is available from 01923 441717 and
[email protected].
CONTENTS
1
Safety Information
1
1.1
Meaning of Symbols and Markings
1
1.2 Precautions
1
2 Introduction
3
2.1 Inspection
3
2.2 Description
3
2.3
Accessories
3
2.4 Battery
Installation
3
3 Operation
4
3.1 SPC70
Elements
4
3.2
Low Battery Indication
4
3.3
Testing / Adjusting a Sound Level Meter
4
3.4 Testing
Considerations
5
4 Maintenance
6
4.1
Battery Replacement
6
4.2 Calibration
6
4.3 Cleaning
6
4.4
Repair & Service
7
4.5 Storage
Conditions
7
5 Warranty
8
Specifications
1. SAFETY INFORMATION: Always read before proceeding.
REMEMBER: SAFETY IS NO ACCIDENT
These instructions contain both information and cautions that are
necessary for the correct operation and maintenance of this product.
It is recommended that you read the instructions carefully and ensure
that the contents are fully understood.
Particular attention should be paid to the Precautions and Technical
Specifi cations.
Please keep these instructions for future reference. Updated
instructions and product information are available at:
www.martindale-electric.co.uk
1.1 Meaning of Symbols and Markings
Caution - refer to instructions
Equipment complies with relevant EU Directives
End of life disposal of this equipment should be in
accordance with relevant EU Directives
1.2 Precautions
This product has been designed with your safety in mind, but please
pay attention to the following warnings and cautions before use.
Cautions
The SPC70 must only be used by a skilled and competent person
who is familiar with the relevant regulations, the safety risks involved
and the consequent normal safe working practices, and under the
conditions and for the purposes for which it has been constructed
and specified.
1
2
Before use check the unit for cracks or any other damage. Make
sure the unit is free from dust, grease and moisture.
Do not
use if
damaged.
The microphone cavity in particular must be protected from
exposure to water or dust as dust or contamination can alter the
performance characteristics of the unit. Always replace the unit in
its carry case when not in use.
Avoid severe mechanical shock or vibration and extreme
temperature.
To avoid possible corrosion from a leaking battery, remove the
battery if discharged, or when the unit is not in use for an extended
period.
