Spin Spin Rivet-Nut Tool Instructions
SST-1
(39801)
, SST-2
(39802),
SST-3
(39803) &
SST-4
(39804)
*see the optional FEA
(front end assembly chart
The models SST-1, SST-2, SST-3 and SST-4 pneumatic Rivet-Nut tools
are designed to provide a user friendly, light weight, quiet, fast and
powerful Rivet-Nut insert installation tool that provides long life &
trouble free service.
Weight: 2.5 lbs. ¼” NPT male air fitting required
Alcoa Fastening Systems
1925 N MacArthur Dr.
Suite 200
Tracy, CA 95376
AFS
LA-530
SST-1 = 3,000 RPM
SST-2 = 1,500 RPM
SST-3 = 600 RPM
SST-4 = 400 RPM
RPM CHART
CAUTION:
ALWAYS WEAR SAFETY GLASSES WHEN OPERATING TOOL
Recommended air pressure: 45 to 100 PSI.*
The air supply to the tool should be dry and free of contamination to prevent wear and
tear of the internal components. It is recommended that a filter, pressure regulator and
oiler system be used "in line" as close to tool as possible.
* PSI setting depends upon material, thread size and thickness
The average air setting is 80 PSI.
See next page (2) for Optional Front End Assemblies (FEA)
for your tool
