background image

Version 24.11.2016 

O-301-R

Installation Manual

O-301-R

Rear-view camera OBD-coder 

for VW RNS315/Amundsen,  

RNS510/Columbus navigation systems 

and RCD510 radio with 26pin connector 

as well as Audi MIB MMI Navigation and 

VW MIB Composition Media 

Delivery contents 

 

 

 

 

 

Legal Information 

Changes/updates of the vehicle’s software can cause malfunctions of the interface.   We 

offer free software-updates for our interfaces for one year after purchase.  To receive a free 

update, the interface must be sent in at own cost. Labor cost for and other expenses 

involved with the software-updates will not be refunded.  

Take down the SW-version and  

HW-version of the interface boxes, 

 and store this manual for support 

purposes. 

HW______________ 

SW______________ 

O-301-R

Summary of Contents for O-301-R

Page 1: ...rmation Changes updates of the vehicle s software can cause malfunctions of the interface We offer free software updates for our interfaces for one year after purchase To receive a free update the interface must be sent in at own cost Labor cost for and other expenses involved with the software updates will not be refunded Take down the SW version and HW version of the interface boxes and store th...

Page 2: ... 2 3 Wait until the head unit has booted 4 Plug coder into OBD port message DIAG is shown in the display 5 Leave coder for about 30 seconds in OBD port 6 Remove coder from the OBD port 7 A reset is necessary Press buttons Tr Tr and together and hold them until the reset is done To reverse the coding repeat steps 1 7 Requirements Vehicle Audi Skoda Volkswagen Navigation RNS315 Amundsen and RNS510 C...

Page 3: ...steps 2 7 Note After the first use on a vehicle the coder O 301 R is personalized to this vehicle head unit and can be used unlimited times to code or reverse coding on this vehicle Rear view camera video connection Vehicle with RNS315 Amundsen RCD510 and RNS510 Columbus The video interface RL MFD3 is additionally required for these systems available seperately Vehicle with MIB Composition Media u...

Page 4: ...and trademarks as well as product names codes are registered trademarks of their corresponding legal owners LED Status Explication Green Lights Coding procedure successfully completed Flashes Coding process is running Red Lights Remove coding procedure successfully completed Flashes Coding process failed license violation Green Red Lights CAN Communication Error Abort of the diagnostic session ...

Reviews: