12” Grab Rail - Fitting and User Instructions
MI0233 issue 4
Congratulations on purchasing your 12” Grab Rail by Mangar International. The
Grab Rail offers a safe hand hold providing;
a support to push or pull against when standing up or sitting down.
•
a steadying support while sitting
•
down.
a firm grip whilst transferring from one position to another.
•
balance when standing or dressing.
•
Contents:
1 x 12” Grab Rail.
6 x wall fixing screws.
6 x wall plugs.
Fitting
WARNING:
Before fitting, ensure that there are no concealed electrical cables or
pipes where the fixing holes are to be drilled.
The fixings supplied are ONLY suitable for use in solid walls. If fitting to
1.
plasterboard walls ensure suitable fixings are used. If in doubt consult a
qualified tradesman.
Position the Grab Rail on the wall either horizontally or at an angle to suit and
2.
mark the six hole locations.
Drill the six holes to a depth approximately 5 mm greater than the length of the
3.
wall plugs provided and insert the plugs (
A
).
Fit the screws (
4.
B
) through the holes of the base and into the plugs and fully
tighten.
Push the covers (
5.
C
) onto each base to conceal the screws and complete the
fitting.
B
C
A
(Model:
AB
0001;
AB
0007 & AB0025)
freedom through lightweight solutions
