®
®
ANGUTEC
©
Manfred Frank Systems Limited
www.manfredfrank.com
ALL RIGHTS RESERVED
10.0 THRU
2 x 45 Chamfer
A
40
80.0
M8 Socket Head Cap Screw (x2)
M8 Washer (x2)
4x25 Pan Head Wood Screw (x6)
4x20 Pan Head Wood Screw (x4)
Clip On Cover D5D
Door Insert D5B
M8 Insert Nut (x2)
Note:
Dimensions based on Zero Gap
between Door and Frame
Adjust Hinge for Gap
between Doors
USE INSERT POSITION 4,3 or 2
© Manfred Frank Systems Ltd.
All Rights Reserved.
Disclaimer of Liability
Since the conditions or methods of installation, operation, use and maintenance of this product are beyond its
control, Manfred Frank Systems Limited does not assume responsibility and expressly disclaims liability of loss,
damage, or expense arising out of or in any way connected with such installation, operation, use, or maintenance.
CURTAIN WALL - D50 MORTISED INSERT - NON-GLASS DOOR - NON-GLASS FRAME
Installation Manual
MFH100
®
www.manfredfrank.com
CONTACT & SUPPORT:
Manfred Frank Systems, Unit C, 11 Echelon Place, Botany 2013, Auckland, New Zealand
PO Box 259239, Botany 2163, Auckland, New Zealand
+64 9 272 3690
DISCLAIMER OF LIABILITY:
Since the conditions or methods of installation, operation, use and maintenance
of this product are beyond its control, Manfred Frank Systems Limited does not
assume responsibility and expressly disclaims liability of loss, damage, or expense arising
out of or in any way connected with such installation, operation, use, or maintenance.
PANEL DETAILS
