Sole Worldwide Distributor:
RH Hall
Hallco House, Beacon Court
Pitstone Green Business Park
Pitstone Leighton Buzzard
Bedfordshire. LU7 9GY
Tel:
01296 663400
Fax:
01296 663401
E:
W:
www.rhhall.com
W:
www.maestrowave.com
NOTE!
During timer operation, you can change the duration at any time with the arrow keys. With the
memory function of the device, the power stage or temperature settings remain unchanged here.
Just as well you may adjust the power stage or temperature stage selection without a change of time
specification.
Once the cooking or warming process is finished, disconnect the mains plug from the
outlet
Do not place any empty cookware on the glass field. Heating an empty pot or pan activates the
overheating protection and the device turns off
Do not operate the device if it is damaged in any way or does not function properly
The use of accessories and spare parts not recommended by the manufacturer may lead to
damage on the device and injuries
6. Cleaning and Care
6.1 Safety Advice
Before beginning with repair or cleaning works make sure the device has been disconnected
from the power socket (pull the power plug!!!)
DO not use any acid agents and make sure no water ingresses the device
To protect yourself from electric shock,
never
immerse the device, it cable and the plug in
water or any other liquids.
Use soft cloth only and make sure you
never
use any kind of abrasive agent or pads, which
could scratch the surface
Regular liquid detergent and water are sufficient to remove marks of finger print, grease or dirt.
In exceptional cases you may use commercial non-abrasive agents or commercial agents that
are used for the purification of glass.
After the cleaning procedure you should use a soft dry cloth to wipe dry and polish the surface.
6.2 Cleaning
Switch of the device and disconnect the power plug from its socket.
At first you should let the device cool down
Wipe the glass with a damp cloth or use a mild, non-abrasive soap solution.
Wipe of the control panel with a soft cloth or with mild detergent.
Do not use any petrol products, these cause damage to the plastic
Make sure that the bottom of the cookware does not scrape across the glass surface, although
this does not impair the use of the device.
Make sure the device has been cleaned and dried properly before further usage.
6.3 Safety advice for maintenance
Check the mains connection cable for damage from time to time. Never operate the device
with the cable damaged. If the mains cable shows defects let a qualified electrician exchange
it.
When you encounter damage or failures contact your dealer.
Only qualified experts may perform repair and maintenance work on the device using original
replacement and accessory parts. Never attempt to repair the device yourself.
Instruction Manual
Induction Cooker C30L4B
