background image

 

Dear Customer, 
 

  Congratulations on your purchase and welcome to the world’s finest brand 
of car audio. Through years of critical testing procedures and hand 
craftsmanship, MA Audio has created a wide range of products that reproduce 
music with all the clarity and richness you deserve. 
 

  For maximum performance we recommend you have your new MA 
Audio product installed by an Authorized MA Audio Dealer.  Please read 
your warranty and retain your receipt and original carton for possible  
future use. 

 

 

To learn more about MA Audio products and the current World Records held, 

please visit us on the world wide web at: 

 

www.MaAudio.com

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

!! Attention !! 

Continuous, excessive exposure to sound pressure levels in excess of 85 dB 
can cause hearing loss.  While MA Audio sound systems are capable of 
producing sound pressure levels greater than 85dB, they are also designed for 
enjoyment at reasonable levels.  Please observe all local sound ordinances 
while listening to your MA Audio sound system.

 

Table of Contents 

 

Features and Specifications ...........................................................................1 
 
Amplifier Wiring & Controls........ ................................................................2 
 

Planning / Mounting Your System.................................................................4 
 
Adjustment and Tuning .................................................................................5 
 
Wiring Diagrams............................................................................................6 
 
Trouble Shooting Guide ................................................................................9 
 
Warranty.......................................................................................................11 
 
Notes.............................................................................................................12 
 
Warning.........................................................................................................13 
 
 
 
 

 

Summary of Contents for HK-102SX









Reviews: