User's Manual
PB-9006
RIVETER NUT ADAPTOR
5
3
1
6
4
2
PB-9006
Dimensions
59mm x172mm(2-11/32" x 6-25/32")
Weight
280g=0.62 lbs
Nosepiece
M3 M4 M5 M6
Hex Shank
1/4" (6.35 mm)
Cordless Drill
12V 14.4V
Reversible electric
Drill (Advice 500W)
Reversible pneumatic
Drill (Advice 3/8")
Min. Torque Strength
15 Nm = 11 ft/Ibs
Max. rpm
1000 rpm
Remove the unit and the accessory out of the
packaging . keep packaging materials Out of reach of
children.there is risk of suffocation
1. Hex Shank
1/4 (6.35 mm)
2. Housing
PA+GF
3. Nosepiece
M3
4. Sight Window
Blind Nut Loading
5. Nosepiece
M4 M5 M6
6. Wrench
1PC
Please note the following safety instructions to avoid
malfunctions,damage or physical injury:
1.Please observe all safety notes of the used driving
tool(drill)
2.Always switch off the driving tool and pull the power
plug before maintaining the blind rivet attachment, e.g.
changing the nose pieces or when not in use.
3.Only use the blind rivet attachment as indicated in this
manual for setting blind nuts. The unit is not designed for
continuous, professional use.
4.Always secure the work piece.
5.Do not wear loose clothing or jewellry. Tie up hair or
clothing so it cannot get caught in moving parts.
6.Only use the blind rivet attachment with the included
nosepieces.
7.Should the unit become damaged do not use it and have
it repaired by a professional or contact our customer
support department. Do not disassemble the unit or try
repairing it yourself.
Safety Instructions
1. Thread the rivet nut onto the tool.
2. Position the rivet nut into the hole.
Ensure the drill is in forwards gear.
While holding the body of the
attachment to stop it from rotating, press
the trigger. This will fasten the rivet.
3. Change the drill to reverse then
press trigger. This will release the
tool from the rivet nut.
1
2
3
View the demonstration video at
www.mighty-seven.com
Please note the following safety instructions to avoid
malfunctions,damage or physical injury:
1. Please observe all safety notes of the used driving tool
(drill.)
2. Always switch off the driving tool and pull the power
plug before maintaining the blind rivet attachment, e.g.
changing the nose pieces or when not in use.
3. Only use the blind rivet attachment as indicated in
this manual for setting blind nuts. The unit is not
designed for continuous, professional use.
4. Always secure the work piece.
5. Do not wear loose clothing or jewellry. Tie up hair or
clothing so it cannot get caught in moving parts.
6. Only use the blind rivet attachment with the included
nosepieces.
7. Should the unit become damaged do not use it and
have it repaired by a professional or contact our
customer support department. Do not disassemble the
unit or try repairing it yourself.
8. Suitable for aluminium, aluminium / steel and all steel
rivets.
9. Not suitable for stainless steel rivets.
10. Not for use with impact drivers
or drills in hammer mode.
