Getting Started
1. Switch ON the main battery
(Figure 1)
a. Main battery switch is located on rear side of
yellow label battery door
b. Adjust
DIP
switch
to
“ON”
c. Place back the battery door
2.
Plugging the Power Cable
(Figure 2)
a.
Plug the AC power cord into the power
socket of the AC power adapter.
b.
Plug the other end of the AC power
cord to a live AC wall outlet.
c.
Plug the connector of the AC adapter
to the DC-IN port found at the left side
of the LYNX 10,4
“
.
3.
Turning on the LYNX 10,4
“
System (Figure 3)
To turn on the LYNX 10,4
“
System,
press the power button. The power
LED will light up to indicate that the
LYNX 10,4
“
System is on.
Figure 1
Figure 2
Figure 3
Main
Packing
List
QTY
QTY
QTY
Main system
1
Stylus
1
Hand Screws
4
Power Adapter
1
Hand Strap
1
Corner Rubber Screw
4
Corner Rubber
2
Shoulder Strap
1
Ethernet Cable
1
Accessories
(Option)
QTY
QTY
QTY
Barcode Scanner
1
MSR
1
DeskTop Docking
1
Vehicle Docking
1
GPS
1
Vehicle Power Adapter
1
Battery Charger
1
Carrying Bag
1
Handle Secures
1
External Battery Pack
1
Exploring Your LYNX 10,4“ System
Lynx 10,4
”
Quick Setup Guide v0.7
