background image

 
 
 
 

 

WARNINGS 

PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE COMMENCING ANY WORK 

 

 
 

 

This is a Class 2 product 

 no earth required 

 

This unit must be fitted by a competent person 

 

if in doubt consult a qualified electrician. 

 

Install in accordance with IEE wiring regulations 
and current Building Regulations. 

 

To prevent electrocution, switch off mains supply 
before installing or maintaining this fitting. Ensure 
other persons cannot restore the electrical 
supply without your knowledge. 

 

This light fitting should be connected to a circuit with a 30Ma RCD fitted. 

 

When changing the bulb(s), always switch off at the mains & allow the bulb to cool 
before handling 

 

LAMP WILL GET HOT WHEN IN USE

 

All connections should be made as watertight as possible to avoid electrical shortage. 

 

Always use the correct type & wattage of bulb. Never exceed the wattage stated. 

 

The unit may get warm whilst on for a period of time. 

 

Cable must 

NOT

 be buried 

 locate on the surface or hook up on fence 

 

The 

plug supplied is not waterproof

. Connect to a waterproof socket or inside 

socket only.

 

 
 

 

Materials:

 Fibre Glass 

Voltage: 

220-240v  

Max. Wattage:

 20W 

Lamp Fitting:

 E27         

Recommended Lamp:

 LED 

IP Rating:

 IP44 

Product Size:

 Various 

Cable:

 H05RN-F with 3 pin plug (may vary) 

 

 

✔✔

 

2 YEAR 

GUARANTEE 

 

see website for 

more details 

 

Full Range & More Information Online: www.lumenalights.com

 

LUXROX Rock Light 240v (with plug) 

INSTRUCTIONS 

LUXROX 1 / LUXROX 2 
LUXROX 3 / LUXROX 4

 

 

Summary of Contents for LUXROX 1

Page 1: ...mains allow the bulb to cool before handling LAMP WILL GET HOT WHEN IN USE All connections should be made as watertight as possible to avoid electrical shortage Always use the correct type wattage of bulb Never exceed the wattage stated The unit may get warm whilst on for a period of time Cable must NOT be buried locate on the surface or hook up on fence The plug supplied is not waterproof Connect...

Page 2: ...itting BULB INSTALLATION Turn off the power supply Remove the base by unscrewing the 4 x screws Screw the E27 ES bulb into the bulb holder DO NOT exceed maximum wattage or overtighten Ensure the cables have not become loose when removing the base Replace the base and secure with the 4 x screws Do not overtighten or this could damage the outer shell If there is damage around the predrilled holes si...

Page 3: ...e dry the ground spike will be secure Mounting into Grass Remove a small area of turf Follow the Mounting into Earth instructions above Mounting into Gravel or Stones Dig a hole 100mm in diameter and 170mm deep Fill with wet sand Attach the spike to the threaded socket provided on the LUXROX base and gently push into the wet sand Push down on the top layer of sand to ensure it is tightly surroundi...

Page 4: ... be issued Please contact us prior to returning goods and include the relevant documents Please see our website for more information RETURNS Lumena Lights Ltd Centre 33 Long March Daventry Northants NN11 4NR Tel 44 1327 871161 Fax 0800 066 4410 Email sales lumenalights com Producer Registration Number WEE KC3440XY www lumenalights com ...

Reviews: