C h a n g i n g C h a n n e l s
This cordless telephone has 10 channels
available for maximum performance.
If you notice noise or interference while
using the handset:
1
Press
C
.
2
If the interference doesn't clear,
continue to press
C
until you find a
clear channel
— OR —
Move closer to the base and press
C
.
NOTE: You must be in range to change
channels. If you press
C
while out of
range, you might lose the call. If you do
lose the call, place the handset in the base
for a few seconds, then make the call again.
O P E R A T I N G R A N G E
This cordless telephone operates at the
maximum power allowed by the Federal
Communications Commission (FCC).
Even so, this handset and base can
communicate over only a certain distance
— which can vary with the locations of the
base and handset, the weather, and the
construction of your home or office. For
best performance, keep the base antenna
fully extended.
If you receive a call while you are out of
range, the handset might not ring — or if
it does ring, the call might not connect
when you press
P
. Move closer to the
base, then press
P
to answer the call.
If you move out of range during a phone
conversation, you will hear noise or
interference. To improve reception, move
closer to the base.
If you move out of range without pressing
O
, your phone will be left “off the hook.”
To hang up properly, walk back into range,
periodically pressing
O
until the PHONE
light goes off.
User's Manual for
Cordless
Telephone 4336
Fold open this paper for information about this
telephone's installation and operation. Please read
Part 1 — Important Product Information, included
in this package.
○
○
© Copyright 1996, 1997 Lucent Technologies Inc. All rights reserved.
Printed in Malaysia. Issue L3
847831633
Part 2
