Ltech LT-851-6A, Manual

Page: 1 / 2

LT-851-6A
DMX/RDM CV Decoder
1
1. Product Parameter:
Input Signal:
Input Voltage:
Current Load:
Output Power:
DMX512 Socket:
DMX512, RDM
5~24Vdc
6A×3CH Max. 18A
(0~30W...144W)
×
3CH Max. 432W
Green Terminal
Protection:
Working Temp.:
Dimensions:
Package Size:
Weight(G.W.):
Short circuit/Over load protection
-30 ℃ ~65 ℃
L175×W42×H33mm
L183×W48×H41mm
310g
LT-851-6A
warranty
5 years
2. Configuration Diagram:
LT-851-6A DMX/RDM Decoder LT-851-6A DMX/RDM Decoder
2
Dip Switch Operation: 3.
FUN = ON (the 10th ) dip switch=ON Self-testing Mode
3.2 Self-testing Mode :
1 = on 4 = on 7 = on 8 = on 9 = on 2 = on 5 = on 3 = on 6 = on
Self-test
Function
1 - 9 = off
Dip Switch
Static
Black Static
Red
Static
Red
Static
Green
Static
Green
Static
Blue
Static
Blue
Static
Yellow
Static
Yellow
Static
Purple
Static
Purple
Static
Cyan
Static
Cyan
7 Colors
Jumping
7 Colors
Jumping
7 Colors
Smooth
7 Colors
Smooth
OFF
ON
[Attn] When several dip switches are on, subjected to the highest switch value
.
As the figure above shows, the effect will be 7 colors smooth at 7 speed level.
Static
White
Static
White
For changing effects (Dip Switch 8 9=on)
:
/
DIP switch 1-7 is used to realize 7 speed
levels. ( 7 = on, the fastest level )
www.ltech-led.com
LT-851-6A w
0-100% dimming or different
lighting effect; workable with single color, bi-color, RGB LED lamps.
ith the standard RDM remote device management protocol, supports DMX512 signal
bi-directional communication, achieves remote management of reading and writing DMX address
(DMX master controller must recognize the RDM protocol). Realize
RDM Mode:
The dip switch 1-10 are OFF.
FUN=ON (the 10th dip switch=ON) Self-testing Mode:
FUN=OFF (the 10th dip switch=OFF)
DMX Mode:
Setting DMX addresses with dip switch 1-9
FUN = OFF (the 10th dip switch ) Mode =OFF DMX
3.1 How to set DMX address via dip switch:
E.g.1: Set Initial Address To 32. E.g.2: Set Initial Address To 37. E.g.3: Set Initial Address To 178.
001+004+032=37 002+016+032+128=178
DMX address value = the total value of (1-9), to get the place value when in “on” position,
otherwise will be 0.