background image

 

Loxit Limited, First Avenue, Poynton Industrial Estate, Poynton, Cheshire, UK. SK12 1YJ 

www.loxit.com     ꞁ     [email protected]     ꞁ     +44(0)1625 856 801

 

Lapbank CB 10

-

 

6420 

 

WARNING  
 

 

 

Children must be under surveillance to ensure that they do not play with this piece of electrical 
equipment.    

 

The product is shipped fully assembled, if the unit is being stored do not double stack.    

 

Ensure the outlet socket the cabinet is connected to is easily accessible. 

 

The weight of the cabinet exceeds 25kg, Do not attempt to lift the cabinet. 

 

Failure to follow the below instructions may result damage to equipment or injury. 
   

 

Maintenance Instructions   

 

 

There are no user maintenance or adjustment points on this machine. Simply clean dust and dirt 
from the outside of the unit and inspect for damage or breaks.    

 

Cleaners and disinfectants must not be highly alkaline or acidic.    

 

The user should visually check the equipment for signs of wear or misuse before each time of 
using and for the security of the screen or any accessories.    

 

The condition of electrical cables and plugs should be checked for wear or abrasion before use.    

 

In addition, the equipment should be visually inspected in more detail every three months to 
ensure that the unit is functioning properly and if it is not the user should report this to the 
manufacturer for advice or for the return of the unit to base for repair.    

 

Incidences of misuse must be reported immediately and the unit placed out of commission.    

 

All repairs to the unit must only be carried out by Loxit.    

 

The warranty is only valid in so far as the equipment has been used and maintained correctly 
and has not been tampered with.    

 

Violent treatment will invalidate the warranty.    

 

During operation if the unit makes any unusual noises or smells turn off the power supply at the 
mains immediately.   

 

Ambient temperature range +5deg C to +40 deg C.  

 

 

 

 

 

 

Summary of Contents for Lapbank CB 10






Reviews: