![background image](http://html.mh-extra.com/html/louvolite/r1735/r1735_instruction_1941793001.webp)
R 1 7 3 5 R E M O T E C O N T R O L
for use with R1725 & R1740 motor
Portable 15 Channel Remote Unit
1 jog = 1 movement, up OR down
2 jogs = 1 movement, up AND down
STEP 1 - PAIRING THE HANDSET WITH THE MOTOR
NOTE: During the setting procedure, the time between two operations must not
exceed 4 seconds as this will cause the setting up process to quit.
• Switch on the power to the motor
• Always press O and + together
• Select a channel from 1 - 15 on the handset by pr or -
• Press the button on the motor and the motor will jog up and down and beep
• On the remote, press O and + together twice then the up or down button once. The motor will jog twice each time and beep
• R1740 - To change direction press and hold the button on the motor for 2 jogs
• R1725 - To change direction press and hold the button on the motor for 4 jogs
The motor and remote are now paired.
STEP 2 - SETTING THE LIMITS
Select the same channel and set the the top limit.
• Press O and + together, then the up button followed by O and + together again, the motor will jog twice and beep
• Press the up button and the blind will start to rise
• Press O and + together and the blind will go into slow jog mode
• Press the stop button on the remote and the blind will stop
• Press and hold the stop button down until the motor jogs twice and beeps, this will set the top limit
Down Button
C (& Setting Button)
Channel -
Setting Button
Stop Button
Up Button