6955 VALJEAN AVE. VAN NUYS, CA 91406 PH: 818-994-6489 | FAX: 818-994-6485 | [email protected] | WWW.LOUROE.COM
Description of Parts
AP-2TB
[1]
Power-Volume
Control
Turns ON power to the unit as indicated by the
Power LED[3]. Turning the knob more clockwise
increase the volume of the monitored audio heard at
the Speaker[9]
[2]
Headphone Jack
Used for private listening. Any 3.5mm stereo
headphone with 8Ω to 600Ω impedance may be
used. Mutes AP-1TB speaker output when in use.
[3]
Power LED
Lights when Power-Volume Control[1] is turned ON
indicating power to the unit.
[4]
Zone 1 Switch
Press to activate Zone 1 for two-way audio
[5]
Zone 2 Switch
Press to activate Zone 2 for two-way audio
[6]
Talkback MIC
Built-in microphone for talkback.
[7]
Playback/Mute
Switch
Used when playing back audio from a recorder or
mute the audio from the microphone. No audio is
heard on the Speaker[9] when this switch is ON.
[8]
Talkback Volume
Control
Rotate clockwise to increase the loudness of audio
heard at the remote Speaker/MIc unit. Rotate
counterclockwise to decrease the level of audio
heard at the remote Speaker/Mic.
[9]
Talkback Switch
Hold down and talk so audio can be heard at the
remote Speaker/Mic unit.
[10]
Monitor Speaker
Monitored audio is heard at this speaker. Muted
when a headset is plug into Headphone Jack[2]
[11]
Audio-In Jack
Receives audio from an external source (recorded
playback from a DVR or VCR).
[12]
Audio-OUT Jack
Sends audio to an external receiver (DVR, VCR, etc.)
[13]
MIC 6-Pin Terminal
Connects to speaker/microphone at remote location.
[14]
DC-IN Jack
Accepts 12 Vdc from external power supply (AC
Adapter included).
AP-2TB
AUDIO MONITORING BASE STATIONS
INSTALLATION AND OPERATING INSTRUCTIONS
AP-2TB (LE-402)
INTRODUCTION
The LOUROE AP-2TB is a two zone audio monitoring base station with a built-in microphone and speaker. When connected with a remote Louroe
Speaker/Microphone, it provides a bi-directional (2-way) communication system. Audio can be monitored by pushing in the zone switch. The blue light on
the switch indicates that the unit is in monitoring mode. The unit contains an “Audio Out” and “Audio In” jack for connection to a DVR/VCR for recording and
playback. A 3.5mm stereo headphone jack is provided for private listening. The AP-2TB is compatible with Louroe Speaker/Microphone Models TLI, TLM
Series, TLMC, TLO and TLSP.
AUDIO
IN
AUDIO
OUT A B C SP G P
A B C SP G P
+12Vddc
500mA
11 12
13
14
1
2 3 4 5
6
7
8
9
10
AP-2TB