Using the SP5 1-Line Rechargeable Alpha Numeric Pager
Charging
The SP5 uses the Charger 5 (CH-R5)
1. Place the pager in the charger
2. Allow unit to fully charge overnight
3. Remove from charger, pager will vibrate or beep to show it is working
4. LCD will show the pager’s ID
5. Replace the pager in the charger at the end of each day
Menus
To access the vibe/contrast menu, remove the pager from the charger. While vibrating or
beeping, press and hold the Select button for 8 seconds. This top-level menu will display:
If you PRESS and RELEASE the SP5 pager button the menu will change to:
To exit this menu wait 8 seconds.
To re-enter the vibe/contrast menu at any time, reset the pager, and then hold the SP5
pager button.
Vibe
To set the Vibration Level
VIBE
CONTRAST
VIBE
CONTRAST
www.pager.net
Long Range Systems
1
SP5 Quick Guide
SP5 1-Line Alpha Numeric
Paging to Pager
QUICK SETUP & OPERATION
Long Range Systems UK Ltd | Link House | Leek Road | Milton | Stoke on Trent | Staffordshire | ST2 7AH | 01782 537000
www.lrspagers.co.uk | www.pagers.co | www.hospitalpagers.co.uk
