Henkel
Americas
Henkel
Europe
Henkel
Asia
Pacific
1-800-LOCTITE
+49.89.320800.1800
+86.21.2891.8863
www.equipment.loctite.com
www.henkel.com/industrial
www.henkel.com/industrial
Document # 985284, Rev E, Date: 06/05/2014
Equipment Instruction Sheet
490 ml Manual Applicator
Item No. 985246
Locating Tab
Release Catch
Plunger
Ratio Selector
Cartridge Tray
Dual Cartridge
Static Mix Nozzle
Retaining Nut
Ejection Button
The applicator is fully assembled and ready to
dispense 10:1 dual cartridges.
On the 490 ml Manual Applicator select ratio. For
extended use, counterbalancing of applicator is
recommended.
1. Retract Plunger
Press release catch and fully retract plunger.
2. Insert dual cartridge
Insert dual cartridge into cartridge tray, ensuring
that the locating tab slides into groove. Push
down until locked into position.
3. Install static mix nozzle
To remove plug from cartridge, leave metal clip
in place and unscrew retaining nut. Install mix
nozzle (sold separately) on cartridge and secure
in place with retaining nut. Dispense product by
squeezing trigger. When dispensing is complete,
press release catch to relieve pressure.
Note:
If dispensing is restricted, product may be
cured in static mix nozzle. Replace nozzle.
4. Removal of cartridge
Press release catch and fully retract plunger.
Press ejection button on cartridge tray.
Replacement Parts & Accessories Part No.
10:1 Cartridge Tray Replacement 985286
4:1 Cartridge Tray Conversion Kit 984211
