Author: JJ Contributors: Date: 3/18/2022 Revised:
TS- My Machine Won’t Hold a Charge (Grand Machines)
Troubleshooting Instructions
Step
Description
Tools
Picture
Models that Apply: Elite Grand 4, 5, and 5-LE
This guide applies when you try to charge your machine but
the battery does not seem to be holding a charge, or the
LED light on the charger is staying green even when
plugged into the wall outlet and the machine.
Step 1 – Check Reset Switch
1.
On Elite Grand models (EL04, EL05, EL05
LE)
The reset switch is found underneath the
rear of machine, to the right of the case
mounting bracket.
2.
If reset switch has tripped, First turn off the
Man Power Switch (A) (found on the left
hand side of the rear of the machine), then
proceed to turn press in the Reset Switch
(B) (*
When tripped the Reset Switch will
expose 1/16
th
of an inch of white on its
underbelly).
(Found on the right hand rear
side of the machine).
3.
Turn the Main Power Switch (A) to the On
position, and then press the power button
(C) on the control panel.
If the reset switch is not tripped and the machine still
does not turn on then go to Step 2
A. Main Power Switch
B. Reset Switch
C. Power Switch
(panel).
Main Power switch (to the
left). Reset Switch (to the
right).
Reset Switch (EL04-EL05 LE)
Step 2 - Check Main Power Switch
(EL04, EL05, EL05 LE models
only
)
1.
Check to make sure the main power switch is in the
on or upright position (This is where the Top is
pushed in and the bottom is sticking out).
2.
The main power switch is located underneath the rear
of machine, to the left of the chassis bracket.
Main Power Switch
