User’s Manual
SK-9065 Wireless Keyboard/SM-9065 Wireless Mouse /SD-9085 USB Dongle
Product Guide
Getting Started
Thank you for choosing this Wireless Keyboard and Mouse Kit. It operates with 2.4GHz RF radio technology to ensure unhindered
communication among the keyboard, the mouse and your computer without a cable connection.
The transmission and reception of the keyboard and mouse are free from angle restrictions.
Preparing Keyboard, Mouse and Receiver
Before working with your new keyboard and mouse, please look at
"Hardware Installation"
, and take a few steps for a one-time preparation.
Hardware Installation
●
Place the receiver at least 20 cm from other electrical devices (e.g. monitor) to achieve optimum performance.
●
The distance among the keyboard, mouse and receiver should not exceed 6 M long in distance.
●
Do not place the receiver on any metal surfaces.
●
Do not move optical mouse on the following surfaces - Glass or any transparent materials
Dark surface
Mirrored or reflective surface
Mouse pad with too many colors
Rough surface
Set up the Mouse
Step 1: Take out the USB receiver and plug the receiver dongle into a USB port on your PC
Step 2: Insert the battery into the mouse
The mouse requires one alkaline AA battery.
●
Open the battery compartment cover at the bottom of the mouse.
●
Push the battery puller in and then insert one AA battery into the battery compartment.
●
Replace the battery compartment cover.
Step 3: Turn on the mouse
●
Ensure the switch at the bottom of the mouse is “ON”
●
The system will take around 10 sec to detect your mouse automatically
Set up the keyboard
Insert the battery.
●
Remove the battery compartment cover at the bottom of the keyboard by pushing it in the direction
of the arrow.
●
Insert two AAA batteries.
●
Place back the battery compartment cover .
●
The system will take around 10 sec to detect your keyboard automatically
CAUTION:
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries
according to instructions. Refer to "Important Battery Information" for disposal instructions.
Working with Keyboard and Mouse
The following sections contain information on using the keyboard and the mouse.
Mouse
In addition to two buttons, the mouse also has a wheel that can be used as followings:
●
As a 3
rd
button: By pressing on the wheel.
●
For scrolling, e.g. in reading document or on viewing Internet pages: Scroll the wheel forward or backward.
Keyboard
●
Re-install battery indicator
One amber-colored LED on upper-right edge of keyboard will keep lit up for 5 seconds when you re-install a new
battery to the keyboard.
●
Low battery warning
Amber-colored LED on upper-right edge of keyboard will keep flashing when it operates in low power.
