background image

HumPRO

TM

 Series Master Development System 

Quick Start Reference

Remove Contents

Remove kit contents including development boards, 
antennas, batteries, modules and USB cables.

1

Set Up the Programming Docks

With the power off, set up boards by inserting EVMs into 
sockets on the Programming Docks and attaching the 
antennas. 

2

Revised 7/27/2017

Install the Windows software from the 
CD that is included with the kit. If already 
installed, skip this step.

Install the Software

3

Connect the Programming Docks to a 
computer with the cables included with 
the kit. USB drivers are on the CD so 
install them if prompted by the computer.

Connect the Programming Docks

4

Start the software. It automatically 
detects conected modules and reads 
their configurations.

Start the Software

5

MDEV-fff-PRO

MDEV-A-fff-PRO

Connect the antenna 

to the Carrier Board

All manuals and user guides at all-guides.com

all-guides.com

Reviews: