Lytespan
®
Accent Lighting System
8605WH
Page 1 of 1
LyteJacks Point Power Jack Mounts From Above Ceiling
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier
a Genlyte Thomas Company
www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division) • A0902
Features
1. Plug Housing:
Aluminum die-casting, contains all electrical components
and supports LyteJack fixture.
2. Plug Jack:
Molded high heat resistant thermoplastic.
3. Molded Cap:
Flame-retardant ABS; snaps onto flange of Plug Housing.
4. 1/2-14 NPSM Thread (Inside)
5. 90° Electrical Connector
6. Mounting Bars:
see accessory table.
7. T-Bar Accessory:
Mounts Point Power Jack to ceiling runner.
Recommended for soft ceilings.
8. 16 Ga. Wire:
Rated 90°C. 8’ supplied. 8’ maximum distance from Lightolier
transformer to prevent excessive voltage drop.
9. 3/4-14 Nut:
Clamps Point Power Jack to ceiling.
10.2 1/4” Dia Washer
11.3/4-14 NPSM Thread:
(outside)
12.Center Bushing:
Remove for Lytedrops.
Electrical
Use with either Lightolier remote transformer 8608 (75W) or 8609 (225W).
Provided with 8’ of wire (to prevent excessive voltage drop).
Options & Accessory
1950–18” Mounting Bars (set of 2).
1951–27” Mounting Bars (set of 2).
1956–T-Bar Mounting Clips (set of 4).
Labels
UL; I.B.E.W.
Catalog No. Finishes
Mounting
8605WH
Matte White
To structurally sturdy ceilings 1/8” to 1 1/2” thick. Must have access from above ceiling.
8618
Matte White
T-Bar Accessory mounts 8605WH to ceiling runner. Must have access from above ceiling.
8605WH
8618
Point Power Jack
Accessory
