TO SET UP WHEELCHAIR
Open wheelchair by tilting to one side and pushing
down on seat rail until opened.
Attach foot rests by aligning holes on tabs at top of
foot rests with hinge pins on outside of front frame,
then swing foot rests to front until Foot Rest release
levers lock into place.
Adjust foot rest length (while user is seated) by
loosening the cam lever just above the foot plate,
pushing in the adjustment button and sliding the
inner tubing up or down to desired setting until the
adjustment button protrudes fully from the
adjustment hole. Then snap cam lever back into
place.
Make sure the foot plate is at least 2.5” from the floor
for proper clearance.
TO FOLD WHEELCHAIR FOR STORAGE
Make sure the foot rests are in the forward (locked) position
with the foot plates in the vertical position or remove the foot
rests by pulling the release levers, swinging the foot rests
outward and lifting them from the hinge pins.
Standing behind the chair, grab the center of the seat and
pull up until closed.
Clean frame with a damp cloth and dust weekly.
Clean upholstery and armrests with mild soap and
water.
Never use abrasive cleansers or scouring pads.
If exposed to liquid, dry the wheelchair thoroughly as
soon as possible.
If any component appears worn or is not working
properly, contact an authorized dealer for repair
and/or appropriate replacement parts.
Solid rubber tires need minimal maintenance, but
should be cleaned occasionally with a damp cloth.
If tires become severely worn or cracking appears,
contact an authorized dealer.
Wheels and Casters should be checked periodically
and adjusted and lubricated as needed by an
authorized dealer.
V2: 3/05/21
Lifestyle Mobility Aids
www.lifestylemobilityaids.com
1-877-843-6464
3200 Tyrone Blvd N
St. Petersburg, FL 33710
