Lifescan In Duo Manual Download

Page: 1 / 90

InDuo

™

Blood Glucose Meter

InDuo™ SYSTEM AND ACCESSORIES

OneTouch

Ultra

Test Strips

OneTouch

Ultra

Control Solution

InDuo

™

Insulin Doser

NovoFine

8 mm needles

(10-pack sample included in kit)

Penfill

3 ml

Insulin cartridge

(not included)

OneTouch

UltraSoft™

Adjustable Blood Sampler

OneTouch

UltraSoft™

Sterile Lancet

OneTouch

UltraClear™

Cap

for alternate puncture site

Combined blood glucose
monitoring and
insulin dosing system

User manual

Manufactured by:

LifeScan Inc.

Milpitas, California 95035, U.S.A.
© LifeScan / Novo Nordisk 2002
Revision date: 06/02

The

InDuo™

System should only be used in combination with products that are

compatible with it and allow the InDuo™ System to function safely and effectively.

OneTouch

Ultra

Test Strips are designed to be used with the InDuo™ blood

glucose meter.

Penfill

3 ml cartridges and

NovoFine

needles are designed to be used with the

InDuo™ insulin doser.

Innovo

, NovoFine

, Novolin-Pen

Penfill

and

are trademarks owned by

Novo Nordisk A/S and used by Novo Nordisk Canada Inc. under licence.

InDuo™, In Touch

, OneTouch

UltraClear

™,

UltraSoft

™

and

Penlet

are trademarks owned by Johnson & Johnson and used by LifeScan Canada Ltd.

Diagram of the InDuo™ System and accessories

Look at the diagram of the InDuo™ System inside this cover for the names of
the different parts of the system. You can unfold the diagram to help you while
you follow the instructions.

DCO_06153701A_ID_OBC_CAN 9/6/02 11:34 AM Page 1

Summary of Contents for In Duo



























































































Search results

Summary of Contents for In Duo

Reviews:

Related manuals for In Duo

Brands by name

Popular brands

Lifescan In Duo, Manual

Search results

Summary of Contents for In Duo

Reviews:

Related manuals for In Duo

Brands by name

Popular brands