Extra Large Button Talking Clock Instructions
Getting started
Inserting the batteries:
This clock is powered by three (3) AAA batteries. Turn the clock over so the base is
facing upwards and locate the battery cover. Locate the fingertip catch on the long side
of the battery cover. Using your fingertip, gently pull the clip and lift the cover away
from the body of the clock.
Insert each battery noting the correct polarity, with the negative (flat) end of each
battery positioned against the spring. Once both batteries are inserted, re-attach the
battery cover ensuring that the two locating lugs sit into the bottom edge of the battery
compartment. Close the cover, you will know when it's properly located as you will hear
an audible click confirming the cover is correctly fitted.
It is recommended that you replace the batteries annually, even if the clock is still
running. Only use AAA (1.5V) alkaline batteries in this clock. Remove the batteries if
the clock is not in use for an extended period. Please dispose of used batteries in a
responsible manner. For more information please contact your local authority.
Using the product
Setting the spoken time:
Please note:
When entering the settings menu and for any reason there is no
activity after five seconds, you will hear an audible high-pitched beep. This indicates
that the clock has reverted to normal time mode. To re-enter the settings mode,
press the mode button and scroll through to the desired settings function and
continue.
