background image

OWNER'S MANUAL

Color Video Camera

Please read this manual carefully before operating your set and 
retain it for future reference.

P/NO : MFL63745130(B)

MODEL

L6323-Series
L6323-BP
L6323-BN

Important Safety Instructions

1. 

Read these instructions. 

2. 

Keep these instructions. 

3. 

Heed all warnings. 

4. 

Follow all instructions. 

5. 

Do not use this apparatus near water.

6. 

Clean only with dry cloth.

7. 

Do not block any ventilation openings. Install in accordance with the 
manufacturer’s instructions. 

8. 

Do not install near any heat sources such as radiators, heat registers, 
stoves, or other apparatus (including amplifiers) that produce heat. 

9. 

Do not defeat the safety purpose of the polarized or grounding-type plug. 
A polarized plug has two blades with one wider than the other. A ground-
ing type plug has two blades and a third grounding prong. The wide blade 
or the third prong are provided for your safety. If the provided plug does 
not fit into your outlet, consult an electrician for replacement of the obso-
lete outlet.

10.  Protect the power cord from being walked on or pinched particularly at 

plugs, convenience receptacles, and the point where they exit from the 
apparatus.

11.  Only use attachments/accessories specified by the manufacturer.

12.  Use only with the cart, stand, tripod, bracket, or table specified by the 

manufacturer, or sold with the apparatus. When a cart is used, use caution 
when moving the cart/apparatus combination to avoid injury from tip-
over.

13.  Unplug this apparatus during lightning storms or when unused for long 

periods of time.

14.  Refer all servicing to qualified service personnel. Servicing is required 

when the apparatus has been damaged in any way, such as power-supply 
cord or plug is damaged, liquid has been spilled or objects have fallen into 
the apparatus, the apparatus has been exposed to rain or moisture, does 
not operate normally, or has been dropped.

Accessories

Installation sticker

Camera mounting bracket

Wrench

M4 Fixing screws

Specification

Item

L6323-BP

L6323-BN

Signal System

PAL

NTSC

Total/Effective Pixels

1028 X 596 / 976 X 582

1028 X 508 / 976 X 494

Image Device

6 mm CCD

DSP

XDI-II

Lens

2.8 mm to 10 mm Vari-focal lens

Digital Zoom

X10

Sync. System

Internal / Line Lock

Scanning Frequency (H/V)

15.625 kHz / 50 Hz

15.734 kHz / 59.94 Hz

Horizontal Resolution

650 TV Lines

S/N Ratio

50 dB 

Minimum 

Illumination

(30 IRE)

Color mode

0.0003 lx (Sens-up Auto, F1.2)

B/W mode

0.000 03 lx (Sens-up Auto, F1.2)

Control Method

Key Button / RS-485

Video Output Signal

1 Vp-p Composite (75 Ω)

Day & Night

DAY / NIGHT / AUTO

BACKLIGHT

OFF / WDR(ACE) / BLC / HSBLC

3D-DNR

OFF / LOW / MIDDLE / HIGH

Auto Gain Control

OFF / LOW / MIDDLE / HIGH

Electronic Shutter Speed

1/50 to 1/120 000

1/60 to 1/120 000

Item

L6323-BP

L6323-BN

Sens-Up

OFF / AUTO 

White Balance

ATW / AUTO / AWC 

b

 PUSH / MANUAL

Motion Detection

REGIONAL MD / SMART MD / TAMPERING MD

Privacy 

Zone 

Masking

RECTANGLE

8 AREAS

CIRCLE

2 AREAS

POLYGON

2 AREAS

Stabilizer( EIS)

On / Off

User Color Mode

NATURAL / COOL / WARM / VIVID

Power Source

DC 12 V / AC 24 V

Power Consumption

2.8 W

Operation Temp.

-10 ºC to 50 ºC

Storage Temp.

-20 ºC to 60 ºC

Operation Humidity

0 % RH to 80 % RH

Storage Humidity

0 % RH to 85 % RH

Weight

840 g

Dimension (Ø x H)

165 mm x 100.3 mm

CAUTION

RISK OF ELECTRIC SHOCK 

DO NOT OPEN

CAUTION: 

TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning flash with arrowhead symbol within an equi-
lateral triangle is intended to alert the user to the presence 
of uninsulated dangerous voltage within the product’s 
enclosure that may be of sufficient magnitude to constitute 
a risk of electric shock to persons. 

The exclamation point within an equilateral triangle is 
intended to alert the user to the presence of important 
operating and maintenance (servicing) instructions in the 
literature accompanying the product.

FCC WARNING: 

This equipment may generate or use radio frequency energy. 

Changes or modifications to this equipment may cause harmful interference 
unless the modifications are expressly approved in the instruction manual. The 
user could lose the authority to operate this equipment if an unauthorized 
change or modification is made.

REGULATORY INFORMATION: FCC Part 15

This equipment has been tested and found to comply with the limits for a Class 
A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed 
to provide reasonable protection against harmful interference when the equip-
ment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, 
if not installed and used in accordance with the instruction manual, may cause 
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful inter-
ference in which case the user will be required to correct the interference at his 
own expense.

A suitable conduit entries, knock-outs or glands shall be provided in the 

• 

cable entries of this product in the end user.

Caution: Danger of explosion if battery is incorrectly replaced. Replaced 

• 

only with the same or equivalent type recommended by the manufacturer. 
Dispose of used batteries according to the manufacturer’s instructions.

Holes in metal, through which insulated wires pass, shall have smooth well 

• 

rounded surfaces or shall be provided with brushings.

This Class A digital apparatus complies with Canadian ICES-003. 
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du 
Canada.

Warning: 

Do not install this equipment in a confined space such as a bookcase 

or similar unit.

Warning:

 Wiring methods shall be in accordance with the National Electric 

Code, ANSI/NFPA 70.

Warning:

 This is a class A product. In a domestic environment this product 

may cause radio interference in which case the user may be required to take 
adequate measures.

Warning:

 To reduce a risk of fire or electric shock, do not expose this product to 

rain or moisture.

Caution:

 This installation should be made by a qualified service person and 

should conform to all local codes.

Caution: 

To avoid electrical shock, do not open the cabinet. Refer servicing to 

qualified personnel only.

Caution:

 The apparatus shall not be exposed to water (dripping or splashing) 

and no objects filled with liquids, such as vases, shall be placed on the appara-
tus.

To disconnect power from mains, pull out the mains cord plug. When install-
ing the product, ensure that the plug is easily accessible.

LG Electronics hereby declares that this/these product(s) is/are in 
compliance with the essential requirements and other relevant pro-
visions of Directive 2004/108/EC, 2006/95/EC, and 2009/125/EC. 

European representative :

LG Electronics Service Europe B.V.
Veluwezoom 15, 1327 AE Almere, 
The Netherlands (Tel : +31-(0)36-547-8888)

Disposal of your old appliance

1. 

When this crossed-out wheeled bin symbol is attached to 
a product it means the product is covered by the European 
Directive 2002/96/EC.

2. 

All electrical and electronic products should be disposed of 
separately from the municipal waste stream via designated 
collection facilities appointed by the government or the local 
authorities.

3. 

The correct disposal of your old appliance will help prevent 
potential negative consequences for the environment and 
human health.

4. 

For more detailed information about disposal of your old 
appliance, please contact your city office, waste disposal 
service or the shop where you purchased the product.

EEE Compliance with Directive. (for Turkey only)

Reviews: