GreenMAX Single and Double Pole Relays
For use with GreenMAX Relay Systems
WARNINGS AND CAUTIONS:
•
TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER
AT CIRCUIT BREAKER
OR FUSE AND TEST THAT THE POWER IS OFF BEFORE WIRING!
• To be installed and/or used in accordance with electrical codes and regulations.
INSTALLATION
English
DI-200-RELAY-22A
Cat. No.
RELAY-BFM
Blank Filler Module
Cat. No.
RELAY-2CB
Double Pole, Return to Closed Latching Relay
208/240VAC, 20A Tungsten Halogen Incandescent, 20A Electronic Ballast and HID
208/240/480VAC, 30A Ballast
600VAC, 20A Ballast
208/240/480VAC 1Hp Motor
Wire Range #14 - #10 AWG Solid Copper, Torque 16 in.-lbs.
Cat. No.
RELAY-2TB
Double Pole, Latching Relay
208/240VAC, 20A Tungsten Halogen Incandescent
208/240/480VAC, 30A Ballast
600VAC, 20A Ballast
208/240/480VAC 1Hp Motor
Wire Range #14 - #10 AWG Solid Copper, Torque 16 in.-lbs.
DOUBLE POLE RELAYS
To Install
1.
WARNING:
TO AVOID FIRE, SHOCK, OR DEATH:
When installation includes any of the Metering Relays listed below, the neutral wire from the Relay Insert Panel must be
connected to the circuit neutral.
DO NOT
energize any load circuits without the neutral jumper installed correctly.
2.
Locate an empty location in the relay cabinet to install the relay.
NOTE:
Remove the cabinet door and covers as needed to provide access to the location in the Relay Insert Panel.
3.
Remove the Blank Filler Module if previously installed. Depress the locking tab of the Relay Insert Panel while sliding the relay module horizontally away from the center connector strip.
4.
Orient the relay alignment tabs and the mounting clips with the slots in the Relay Insert Panel.
5.
Press relay against the Relay Insert Panel and slide the relay horizontally toward the center to engage the connectors.
WIRING:
1.
Follow the wiring diagram on each relay.
NOTE:
Line and load terminals are in pairs on the top and bottom of a horizontally mounted relay. The LINE conductors should be connected
to the lower tier of terminals and the LOAD on the upper tier.
2.
Replace all covers before restoring power.
NOTE:
To remove relay,
TURN OFF POWER
and depress the locking tab of the Relay Insert Panel while sliding the relay module horizontally away from the center connector strip.
LIMITED 10 YEAR WARRANTY AND EXCLUSIONS
Leviton warrants to the original consumer purchaser and not for the benefit of anyone else that this product at the time of its sale by Leviton is free of defects in materials and workmanship under normal and proper use for ten years from the purchase date. Leviton’s only obligation is to correct such
defects by repair or replacement, at its option.
For details visit www.leviton.com or call 1-800-824-3005.
This warranty excludes and there is disclaimed liability for labor for removal of this product or reinstallation. This warranty is void if this product is installed improperly or in an improper
environment, overloaded, misused, opened, abused, or altered in any manner, or is not used under normal operating conditions or not in accordance with any labels or instructions.
There are no other or implied warranties of any kind, including merchantability and fitness for a
particular purpose
, but if any implied warranty is required by the applicable jurisdiction, the duration of any such implied warranty, including merchantability and fitness for a particular purpose, is limited to ten years.
Leviton is not liable for incidental, indirect, special, or consequential
damages, including without limitation, damage to, or loss of use of, any equipment, lost sales or profits or delay or failure to perform this warranty obligation
. The remedies provided herein are the exclusive remedies under this warranty, whether based on contract, tort or otherwise.
For Technical Assistance Call: 1-800-824-3005 (U.S.A. Only) www.leviton.com
GARANTIA LEVITON POR DIEZ ANOS LIMITADA
Leviton garantiza al consumidor original de sus productos y no para beneficio de nadie más que este producto en el momento de su venta por Leviton, está libre de defectos en materiales o fabricación por un período de diez años desde la fecha de la compra original.
La única obligación de Leviton es corregir tales defectos ya sea con reparación o reemplazo, como opción.
Para detalles visite www.leviton.com o llame al 1-800-824-3005.
Esta garantía excluye y renuncia toda responsabilidad de mano de obra por remover o
reinstalar este producto. Esta garantía es inválida si este producto es instalado inapropiadamente o en un ambiente inadecuado, sobrecargado, mal usado, abierto, abusado o alterado en cualquier manera o no es usado bajo condiciones de operación normal o no
conforme con las etiquetas o instrucciones.
No hay otras garantías implicadas de cualquier otro tipo, incluyendo mercadotecnia y propiedad para un propósito en particular
pero si alguna garantía implicada se requiere por la jurisdicción pertinente, la duración
de cualquiera garantía implicada, incluyendo mercadotecnia y propiedad para un propósito en particular, es limitada a diez años.
Leviton no es responsable por daños incidentales, indirectos, especiales o consecuentes, incluyendo sin limitación, daños a, o
pérdida de uso de, cualquier equipo, pérdida de ventas o ganancias o retraso o falla para llevar a cabo la obligación de esta garantía
. Los remedios provistos aquí son remedios exclusivos para esta garantía, ya sea basado en contrato, agravio o de otra manera.
Para Asistencia Técnica llame al: 1-800-824-3005 (Sólo en EE.UU.) www.leviton.com
EXCLUSIONS ET GARANTIE LIMITÉE DE 10 ANS
Leviton garantit au premier acheteur, et uniquement au crédit du dit acheteur, que ce produit ne présente ni défauts de fabrication ni défauts de matériaux au moment de sa vente par Leviton, et n’en présentera pas tant qu’il est utilisé de façon normale et adéquate, pendant une période de
10 ans suivant la date d’achat. La seule obligation de Leviton sera de corriger les dits défauts en réparant ou en remplaçant le produit défectueux si ce dernier est retourné port payé, accompagné d’une preuve de la date d’achat, avant la fin de la dite période de 10 ans, à la
Manufacture
Leviton du Canada Limitée, au soin du service de l’Assurance Qualité, 165 boul. Hymus, Pointe-Claire, (Québec), Canada H9R 1E9
. Par cette garantie, Leviton exclut et décline toute responsabilité envers les frais de main d’oeuvre encourus pour retirer et réinstaller le produit. Cette
garantie sera nulle et non avenue si le produit est installé incorrectement ou dans un environnement inadéquat, s’il a été surchargé, incorrectement utilisé, ouvert, employé de façon abusive ou modifié de quelle que manière que ce soit, ou s’il n’a été utilisé ni dans des conditions normales ni
conformément aux directives ou étiquettes qui l’accompagnent.
Aucune autre garantie, explicite ou implicite, y compris celle de qualité marchande et de conformité au besoin, n’est donnée
, mais si une garantie implicite est requise en vertu de lois applicables, la dite garantie
implicite, y compris la garantie de qualité marchande et de conformité au besoin, est limitée à une durée de 10 ans.
Leviton décline toute responsabilité envers les dommages indirects, particuliers ou consécutifs, incluant, sans restriction, la perte d’usage d’équipement, la perte
de ventes ou les manques à gagner, et tout dommage-intérêt découlant du délai ou du défaut de l’exécution des obligations de cette garantie
. Seuls les recours stipulés dans les présentes, qu’ils soient d’ordre contractuel, délictuel ou autre, sont offerts en vertu de cette garantie.
Ligne d’Assistance Technique : 1 800 405-5320 (Canada seulement) www.leviton.com
FOR CANADA ONLY
For warranty information and/or product returns, residents of Canada should contact Leviton in writing at Leviton Manufacturing of Canada Ltd to the attention of the
Quality Assurance Department, 165 Hymus Blvd, Pointe-Claire (Quebec), Canada H9R 1E9
or by telephone at
1 800 405-5320
.
• If you are not sure about any part of these instructions, consult an electrician.
•
All relays must be installed on a Relay Insert Panel in a Leviton GreenMAX Relay
Systems cabinet.
SINGLE POLE RELAYS
Cat. No.
RELAY-1CB
Single Pole, Return to Closed Latching Relay
24-277VAC, 20A Tungsten Halogen Incandescent, 20A Electronic Ballast and HID
24-277VAC, 30A Ballast
347VAC, 20A Ballast
120VAC 1/2 Hp Motor - 277VAC 1 Hp Motor - 240VAC 1Hp Motor
Wire Range #14 - #10 AWG Solid Copper, Torque 16 in.-lbs.
25,000A SCCR rating at 277VAC
Cat. No.
RELAY-1CM
Single Pole, Return to Closed Latching Relay with Metering
24-277VAC, 20A Tungsten Halogen Incandescent, 20A Electronic Ballast and HID
24-277VAC, 30A Ballast
347VAC, 20A Ballast
120VAC 1/2 Hp Motor - 277VAC 1 Hp Motor - 240VAC 1Hp Motor
Wire Range #14 - #10 AWG Solid Copper, Torque 16 in.-lbs.
25,000A SCCR rating at 277VAC
Cat. No.
RELAY-1TB
Single Pole, Latching Relay
24-277VAC, 20A Tungsten Halogen Incandescent, 20A Electronic Ballast and HID
24-277VAC, 30A Ballast
347VAC, 20A Ballast
120VAC 1/2 Hp Motor - 277VAC 1 Hp Motor - 240VAC 1Hp Motor
Wire Range #14 - #10 AWG Solid Copper, Torque 16 in.-lbs.
25,000A SCCR rating at 277VA
Cat. No.
RELAY-1TM
Single Pole, Latching Relay with Metering
24-277VAC, 20A Tungsten Halogen Incandescent, 20A Electronic Ballast and HID
24-277VAC, 30A Ballast
347VAC, 20A Ballast
120VAC 1/2 Hp Motor - 277VAC 1 Hp Motor - 240VAC 1Hp Motor
Wire Range #14 - #10 AWG Solid Copper, Torque 16 in.-lbs.
25,000A SCCR rating at 277VAC
Cat. No.
RELAY-1DM
Single Pole, Dimming and Metering Latching Relay
24-277VAC, 20A 0-10V Dimming Fluorescent
120-277VAC, 20A 0-10V Sinking Dimming LED Driver
Wire Range #14 - #10 AWG Copper, Torque 16 in.-lbs.
Control Wire Range: #12 - 14 AWG Solid Copper, #12 AWG Stranded, Torque 14 in.-lbs.
25,000A SCCR rating at 277VAC
Cat. No.
RELAY-1DC
Single Pole, Dimming and Metering, Return To Closed Relay
24-277VAC, 20A 0-10V Sinking Dimming Fluorescent
24-277VAC, 20A 0-10V Dimming LED Driver
Wire Range #14 - #10 AWG Copper, Torque 16 in-lbs.
Control Wire Range: #12 - 14 AWG Solid Copper, #12 AWG Stranded, Torque 14 in-lbs.
25,000A SCCR rating at 277VAC
WEB
VERSION
