background image

  

Contents

 

CERTIFICATIONS --------------------------------------------------------------------    

 

 2 

NOTICE ----------------------------------------------------------------------------------     2 

PRECAUTIONS ----------------------------------------------------------------     3 
SPECIAL NOTES ON LCD MONITORS ---------------------------------    4 

 

BEFORE YOU OPERATE THE MONITOR -------------------------------------     4 

FEATURES ----------------------------------------------------------------------    4 
PACKING LIST -----------------------------------------------------------------    

  

INSTALLATION INSTRUCTIONS------------------------------------------    

 

CONTROLS AND CONNECTORS ----------------------------------------   

 

ADJUSTING THE VIEWING ANGLE ------------------------------------- 

  

 

 

 

OPERATING INSTRUCTIONS -----------------------------------------------------   

 

GENERAL INSTRUCTIONS ------------------------------------------------  

   

 

HOW TO USE OSD ----------------------------------------------------------- 

 

10 

ADJUSTING THE PICTURE -------------------------------------------- 

 

10-11 

GREEN MONITOR------------------------------------------------------------  

 

 

12 

PLUG AND PLAY -------------------------------------------------------------   

 

12 

 

TECHNICAL SUPPORT(FAQ) -------------------------------------------------  

 

13-14 

ERROR  MESSAGE & POSSIBLE  SOLUTION ----------------------   

 

15 

 

APPENDIX A  SPECIFICATIONS -----------------------------------------  

 

16 

APPENDIX B  FACTORY PRESET TIMING TABLE -----------------  

 

 

17 

APPENDIX C  CONNECTOR PIN ASSIGNMENT --------------------  

 

18 

 

Notice: 

 

Please read the following words before assembling and using this monitor. 
Any reference to an Lenovo  product, program or service is not intended to 
state or imply that only Lenovo ’s product, program, or service may be used. 
Any functionally equivalent product, program, or service that does not infringe 
any of Lenovo’s intellectual property rights or other legally protectable rights 
may be used instead of the Lenovo  product, program, or service. Evaluation 
and verification of operation in conjunction with other products, programs, or 
services, except those expressly designated by Lenovo, are the user’s 
responsibility. 
Lenovo  may have patents or pending patent applications covering subject 
matter in this document. The furnishing of this document does not give you 
any license to these patents. 
Information in this document is subject to change without notice. 
Without the permission of Lenovo (Beijing) Limited, no part of this manual may 
be reproduced or distributed in any form or by any means. 

 

lenovo

®

 is a lenovo (Beijing) Limited registered trademark. 

 
 
 

 

1

Summary of Contents for LXH-GJ17L3



















Reviews: