background image

USER’S INFORMATION 

MANUAL

©2017 Lennox Industries Inc. 
Dallas, Texas, USA

506443-01 

04/2017

Supersedes 10/2015

 WARNING

Improper installation, adjustment, alteration, service 

or maintenance can cause property damage, personal 

injury or loss of life. Installation and service must  be 

performed by a licensed professional HVAC installer or 

equivalent, service agency, or the gas supplier.

 WARNING

FIRE OR EXPLOSION HAZARD.

Failure to follow safety warnings exactly 

could result in serious injury, death, or 

property damage.

Do not store or use gasoline or other flammable 

vapors and liquids in the vicinity of this or any 

other appliance.
Installation and service must be performed 

by a qualified installer, service agency or the 

gas supplier.

WHAT TO DO IF YOU SMELL GAS:

SLP98UHV

SERIES

VARIABLE

CAPACITY

GAS FURNACE

•   Do not try to light any appliance.
•    Do not touch any electrical switch; do not use any 

phone in your building.

•   Leave the building immediatly
•   Immediately call your gas supplier from a neighbor’s 

phone. Follow the gas supplier’s instructions.

• 

 If  you  cannot  reach  your  gas  supplier,  call  the  fire 

department.

Summary of Contents for SLP98DFV SERIES








Reviews: