background image

©

2017 Lennox Industries Inc. 

Dallas, Texas, USA

506733-01 

10/2017 

Supersedes 10/2012 

ML180UHE 

SERIES

GAS FURNACE

 WARNING

Improper installation, adjustment, alteration, 

service or maintenance can cause property damage, 

personal injury or loss of life. Installation and service 

must  be performed by a licensed professional 

HVAC installer or equivalent, service agency, or the 

gas supplier.

 WARNING

FIRE OR EXPLOSION HAZARD.

Failure to follow safety warnings exactly 

could result in serious injury, death, or 

property damage.

Do not store or use gasoline or other flammable 

vapors and liquids in the vicinity of this or any 

other appliance.

Installation and service must be performed 

by a qualified installer, service agency or the 

gas supplier.

WHAT TO DO IF YOU SMELL GAS:

•   Do not try to light any appliance.
•    Do not touch any electrical switch; do not use any 

phone in your building.

• 

 Leave the building immediately

• 

 Immediately call your gas supplier from a neighbor’s 

phone. Follow the gas supplier’s instructions.

• 

 If you cannot reach your gas supplier, call the fire 

department.

USER’S INFORMATION 

MANUAL

Summary of Contents for ML180UHE








Reviews: