![background image](http://html.mh-extra.com/html/legrand/idp-3050-a/idp-3050-a_installation-instructions_1871477001.webp)
Wattstopper
®
Eight-Outlet Power Strip with Personal Sensor (v2)
Installation Instructions • Instructions d’Installation • Instrucciones de Instalación
No: 24907 – 09/16 rev. 1
Catalog Number • Numéro de Catalogue • Número de Catálogo: IDP-3050-A
Country of Origin: Made in China • Pays d’origine: Fabriqué en Chine • País de origen: Hecho en China
SPECIFICATIONS
Power Strip
Electrical rating ............................... 125VAC, 12A, 50/60Hz
Dry contact relay ...........................................................12A
Grounded LED ....... indicates correct wiring and grounding
Protected LED ......indicates functioning of surge protection
Eight outlets ...................... Six controlled, two uncontrolled
8 foot cord .................................................................. Black
UL 1449 3rd Edition rating
L-N .......................................................................500V
L-G, N-G ..............................................................600V
Circuit ................................High Energy, Multi-stage hybrid
Noise filtration ..........................................0-25dB (94.38%)
Joule rating .........................................................740 Joules
Maximum surge amperage ............................48,000 Amps
Protection modes ..........................................L-N, L-G, N-G
Response time ............................................. Instantaneous
Let through voltage .....................................................140V
Initial clamping voltage ................................................200V
Personal Sensor .......DI-110 passive infrared occupancy sensor
Supply Voltage ............................................ 12VDC Typical
Time Delay Adjustment ..............30 seconds to 30 minutes
UL & cUL listed
US Patent: 5,598,042
DESCRIPTION AND OPERATION
The Wattstopper Isolé IDP-3050-A is an advanced energy
saving control system, designed for general office use. It
combines an eight-outlet power strip with the DI-110 personal
sensor. The IDP-3050-A controls power used by plug load
devices, and provides surge protection. Its use reduces energy
costs and helps the environment by turning power-consuming
devices off based on occupancy.
THE POWER STRIP
Functionally, the power strip provides surge protection. It also filters noise caused by electromagnetic interference (EMI) and radio
frequency interference (RFI).
WARNING:
RISK OF ELECTRIC SHOCK. DO NOT PLUG INTO ANOTHER RELOCATABLE POWER TAP.
This device features an internal protection that will disconnect the surge protective component at the end of its useful life,
but will maintain power to the load now unprotected.
Outlets
Six of the power strip’s eight outlets are controlled by the personal
sensor, and the remaining two are uncontrolled.
Switches
The power strip has an
ON/OFF
switch to turn on or off its outlets.
Diagnostic Lights
“Protected” LED indicator:
When the surge protector is operating
correctly, the LED indicator labeled “Protected” is lit. When unlit, this
LED indicates the occurrence of a power disturbance or fault within the
unit.
“Grounded” LED indicator:
Another LED indicator, labeled
“Grounded,” is lit when the wall outlet is properly wired and grounded. The surge protection will not operate if the power strip is not
properly grounded.
ON/OFF Switch
Sensor Controlled Outlets
Uncontrolled
Outlets
Diagnostic Lights