07-00323H F228, F228-230V
1
Legend Brands, Inc./Legend Brands Holdings Ltd.
Owner
’s Manual – AirWolf
Model F228, F228-230V
Legend Brands, Inc.
15180 Josh Wilson Road, Burlington, WA USA 98233
Phone US: 800 -932-3030 Fax: 360-757-7950 LegendBrandsRestoration.com
Model F284-230V UK/EU
Legend Brands Holdings Limited
22 Plover Close, Interchange Park, Newport Pagnell, MK16 9PS
Tel: +44 (0)1908-611-211 Fax: +44 (0)1908-611-363 LegendBrandsEurope.com
The AirWolf is a high-pressure air blower suitable for use in a variety of applications.
Patents:
R E A D A N D S A V E T H E S E I N S T R U C T I O N S
Safety Information
WARNING!
Do not alter or modify your Airwolf in any way.
Use only replacement parts authorized by Legend Brands, Inc..
Modifications or use of unapproved parts could create a hazard
and will void your warranty. Contact your authorized Dri -Eaz
distributor for assistance.
Keep Children Away:
This appliance can be used by children
aged from 8 years and above and persons with reduced physi-
cal sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand
the hazard involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children
without supervision.
Keep Unit Grounded
: Always operate the unit with a ground-
ing plug and a grounded electrical outlet. A grounding plug is
an essential safety feature that helps reduce the risk of shock
or fire.
WARNING
a) Do not operate any fan with a damaged cord or plug. Dis-
card fan or return to an authorized service facility for examina-
tion and/or repair.
b) Do not run cord under carpeting. Do not cover cord with
throw rugs, runners, or similar coverings. Do not route cord un-
der furniture or appliances. Arrange cord away from traffic area
and where it will not be tripped over.
Do not use with extension cords.
115V model: Use only on GFCI protected receptacles.
Keep Motor Dry:
Never allow water inside the unit
’s motor. If
the motor becomes wet for any reason, thoroughly dry it before
use.
Avoid Pooled Water:
Never operate the unit in pooled or
standing water, as this may create a risk of serious injury from
electrical shock.
WARNING! Do Not Use Speed Control Device:
To reduce
the risk of fire or electric shock, do not use TurboDryers with a
solid-state speed control device.
Storage:
Store the unit in a clean dry environment. Do not
store the unit outdoors.
Air Intakes Must Be Clear:
Operate the unit away from dra-
peries and other materials that may come in contact with the
air intakes. Do not allow any material to clog or block air in-
takes, as this may cause the unit to overheat and result in a
fire or electrical hazard.
Don
’t Operate Without Safety Screens:
Never operate the
unit without the factory installed safety screens on the air inlets
and air exhaust as the rapidly revolving wheel can cause seri-
ous injury.
Keep Away From Heaters:
Do not use the unit for circulating
hot air by placing the intakes close to a heater. The housing
could melt or the motor could overheat and cause a fire or
electrical hazard.
Keep Away From Explosive Gas:
Do not operate the unit in
an area containing combustible gas. This could cause a dan-
ger of fire or explosion.
Maintenance or Repair:
Do not attempt to disassemble or re-
pair the unit if you are not qualified to do so. If the unit is not
working as it should, return it to Dri-Eaz or an authorized
dealer or distributor for servicing. Note: For inf ormation about
authorized repair and maintenance call Legend Brands, Inc. at
800-932-3030.
OPERATION
Place the AirWolf on a stable, flat surface in an area where
children can be kept away.
Attach inflation tube or ducting to the outlet snout of the Air-
wolf. The outlet has a raised lip to hold the ducting when se-
cured by a strap or other tightener.
NOTICE:
The AirWolf is designed to run while attached to an
inflation tube or ducting. The unit runs quieter and draws less
power when attached to ducting and running under load. Never
run the AirWolf with no load.
Plug in to a standard circuit, and turn on with the one-speed
switch. Be certain the unit is operating correctly and safely be-
fore allowing it to run unattended.
For storage, units may be stacked up to three high. Turn each
unit on its side, with the black circular ring of the air intake
