Installation guide
EnviroHub
LEAFIELD recycling products
Cleaning
Products should be rinsed with
clean water and then washed with a mild
detergent solution using a bristle brush
or sponge. Care should be taken not to
apply undue pressure that may damage
labels. Flush clean with water after
washing. Non heated pressure washer
can be used at no closer the 400mm
away from the unit. The Pressure should
be no more than 100 Bar.
Tools
Cross head screw driver
Assembly
1
2
Post
Leafield Way
Leafield Industrial Estate
Corsham, Wiltshire SN13 9UD
Telephone
01225 816541
Fax
01225 816501
envinfo@leafieldenv
.
com
Website
www.leafield-
environmental.com
Line the body mouldings up using the pre drilled holes as a guide.
Taking 1 screw at a time reach in side of
the 100L Envirobin. Tightening each
screw by hand.
PPE
Always wear appropriate PPE
equipment and follow safety guidelines.
Quality Standards
All Leafield Environmental
products are cer
tificated to BS EN ISO
