manualshive.com logo in svg
background image

 

 

 
 

                                         LAUNDRYLUX 

 

www.laundrylux.com

 

 

461 DOUGHTY BLVD, INWOOD, NY 11096-0338  

  TELEPHONE: 516-371-4400 

                                                                           SALES AND ADMINISTRATION   

Fax (US & Canada):  516-371-4204  

  e-mail: [email protected]

                   

PARTS AND SERVICE

    Parts:  516-371-2000  

  Service:  516-371-0700   

  Fax (US & Canada):  516-371-4029  

     e-mail:  [email protected] 

 

Technical Information: TI 1146A 

                         
                                     

 

 
CAUTION: 

THESE INSTRUCTIONS ARE INTENDED TO ASSIST QUALIFIED, 

EXPERIENCED SERVICE PERSONNEL ONLY! IMPROPER SERVICING OF 
MACHINERY MAY RESULT IN HAZARDOUS CONDITIONS, PERSONAL INJURY, OR 
DAMAGE TO PROPERTY. PERSONS NOT TRAINED, OR PERSONS UNFAMILIAR WITH 
THESE PRODUCTS, SHOULD REFER SERVICING TO QUALIFIED PERSONNEL. 

 

ALWAYS DISCONNECT ELECTRICAL POWER  

BEFORE SERVICING EQUIPMENT 

 

 

Tools Required:  

  Dryer/washer service keys (Included in drum kit) 

  Socket wrench and extension recommended. 

 

Parts: 

  0020809423F Washer replacement-top cover panel 

  REQUIRED for DLHS-WHLFP mounting. (Dryer-over-washer)  

  NOT REQUIRED for DLHS- DLHF mounting. (Dryer-over-dryer) 

  099126 KIT,ANTI-TIPPING,DLHS DRYER.  (For locations requiring this) 

 

 

STACKING INSTRUCTIONS: 
DLHSxxxx dryer over DLHFxxxx dryer or 
DLHSxxxx dryer over WHLFPxxxx washer. 

 

DLHSxxxx 

Bottom control dryer 

DLHFxxxx 

Top control dryer 

WHLFPxxxx 

Washer 

DLHSxxxx 

Bottom control dryer 

Содержание DLHS DLHF Series















Отзывы: