background image

1

WARNING: If not followed, death or serious injury may result.

  

Caution: If not followed injury or damage may result.

  

This (sliding door system) should be installed by a qualified person. If the system is not installed correctly, the door will not 
operate smoothly, and may cause injury.

It is necessary to manufacture the frame with sufficient strength so that it endures the weight of the door and any impact 
upon opening/closing the door. Only use designated screws and ensure that they are fastened firmly. A frame with poor 
strength or loose screws might result in the door falling and causing injury.

Do not try to use this product for anything other than its original purpose. Do not use any part for applications outside of its 
specification.

Do not disassemble nor modify any parts other than those described in this document.

Make sure to follow the designated dimensions, specifications, and horizontal/vertical angles. Make sure that the frame is 
not warped, since it may affect the movement of the door.

If cutting any parts, make sure to remove any burrs before installation. Also check the upper track for any left-over burrs or 
scraps and remove these.

This product is a part for architectural fittings. After installation, make sure to test the finished product thoroughly to ensure 
that it is well-functioning and safe. Please inform the end user about general precautions and safety to prevent improper use.

Make sure to check the screws for slack at regular intervals (one month from first usage, half a year, and then one time 
every year is recommended).

Prohibited

Warning
Caution

Required

Meaning of symbols

FD35EV SLIDING DOOR SYSTEM Installation Manual

2XWVHW7\SHZLWK7ZRZD\VRIWFORVH

Part No.:FD35EVDHCP-AK

   

This product is a parts set for an overlay indoor sliding door 
system.

●   

The door closes in a 2 soft motion steps; first slow, then 
fast, and opens with a 1 step soft motion.

●  

 

   

Easy door installation and adjustment.

Thank you for selecting our product. Before starting installation, please read this manual thoroughly to ensure correct installation.
Please keep this manual at hand for future reference.

Max. Door height

2400 mm

Max. Door width

590 − 1200 mm

0LQ'RRUWKLFNQHVV

30 − 36 mm

Max. Door weight

35  kg ※

1

9HUWLFDODGMXVWPHQW

3mm upward, 4 mm downward

)URQWUHDUDGMXVWPHQW

± 2 mm

ABOUT THE PRODUCT

SPECIFICATIONS

FOR YOUR SAFE WORK AND CORRECT INSTALLATION

   The closing speed of the soft closing type door may change due to 

ambient temperature, operating method or installation quality.

   Recommended ambient temperature range is 5 to 40°C.

1

   If a light weight door is applied, you may feel the resistance 

of the soft closer when opening the door.

Summary of Contents for FM150PRO









Reviews: