WT-3161WH www.lacrossetechnology.com/support
Page | 1
Model: WT-3161WH
Instruction Manual
DC: 041916
16” Atomic Wall Clock
Get Started
1:
Slide the switch to select a time zone.
2:
Insert 1 fresh AA, Alkaline battery according to the polarity
marked on the case.
3:
For the best reception, please place clock on a wall that faces
Ft. Collins, Colorado. During the night, your clock will
automatically set itself.
•
When the battery is installed, the hands will move to the 12:00
position and search for the radio signal.
•
If the radio signal is not received in the first 10 minutes,
the
clock will start running from the 12:00 position
and will
continue to run.
•
The clock is searching for the WWVB signal and once the
radio signal is decoded, the hands will automatically adjust to
the correct time. This may take up to 5 nights if there is
atmospheric interference.
Reset:
If the clock does not respond to the various function
modes, press the RESET button on the movement case.
