background image

• 

Indoor temperature display 

WS-8017U 

• 

Outdoor temperature display via 433MHz transmission 

ATOMIC CLOCK WITH OUTDOOR  WIRELESS TEMPERATURE

  

Instruction Manual 

Holder

Hanging holes

Battery cover

LCD1 
display 

LCD2 
display 

Foldable stand 

Foldable stand 

 
 
 
 

• 

Wall mount or freestanding 

 

OUTDOOR TEMPERATURE TRANSMITTER: 

 

INTRODUCTION: 

 

 

Congratulations on purchasing this state-of-the-art Atomic Clock as an example of superior design 
and engineering. Providing WWVB radio-controlled time, date, time zone, indoor and outdoor 
temperature display,  this innovative clock is ideal for home or office use. Operation of this product is 
simple and straightforward. By reading this operating manual, the user will however receive a better 
understanding of the Atomic Clock together with the optimum benefit of all its features. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 
 

FEATURES: 

 
 
 
 

 

 
 

ATOMIC CLOCK: 

 
 
 

 

 
 

• 

Remote transmission of outdoor temperature to the Atomic clock by 433 MHz signals 

 

• 

Wall mounting case 

 

 

 

TO INSTALL AND REPLACE BATTERIES IN THE ATOMIC CLOCK 

 

The Atomic Clock uses 2 x AA, 1.5V batteries. To install and replace the batteries, please follow the 
steps below:  

 
 
 

1. 

Insert finger or other solid object in the space at the bottom center of the battery compartment 
and lift up to remove the cover. 

 

 

2. 

Insert batteries observing the correct polarity (see marking). 

 
 
 
 

3. 

Replace compartment cover. 

Function keys

DO NOT SET THE CLOCK. 

 
 

• 

WWVB Radio controlled time with manual time setting 

 

TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE TRANSMITTER 

• 

12/24 hour time display 

The transmitter uses 2 x AA,1.5V batteries. To install and replace the batteries, please follow the 
steps below: 

• 

Time display: hour, minute, second 

• 

Alarm setting with snooze function 

1. 

Remove the cover. 

• 

Calendar display 

2. 

Insert the batteries, observing the correct polarity (see marking). 

• 

Weekday display (3 languages to choose from: English, French and Spanish) 

3. 

Replace the battery cover on the unit. 

• 

Time zone setting 

Alkaline batteries are recommended for use in both units. Avoid using rechargable batteries. 

• 

Daylight savings time ON/OFF option (DST) 

• 

ºC or ºF temperature display selectable  

Summary of Contents for WS-8017U-MAH










Reviews: