background image

 

5

TOUCH-SCREEN WEATHER STATION MODEL 

 WS-3510 

 

QUICK OPERATION GUIDE 

 

1 Shipping 

Contents 

The shipping contents of the touch-screen weather station WS-
3510 include the touch-screen weather station, a remote 
temperature/humidity sensor, the respective connecting cables, 
an AC adapter and the PC software package on CD-ROM.

 

 

2 Connections 

The use of the direct cable connection between the touch-screen 
weather station and remote temperature/humidity sensor depends on 
the chosen operating mode (see Item 

3 Power Supply

). 

  

3 Power 

Supply 

Depending on the type of data transmission from remote tempera-
ture/humidity sensor to touch-screen weather station, the units can be 
supplied with power in the following possible combinations:   

 

With cable connection or 433 MHz wireless transmission: touch-
screen weather station batteries, remote temperature/humidity 
sensor batteries.     

 

With 433 MHz wireless transmission: touch-screen weather station 
AC adapter, remote temperature/humidity sensor batteries.   

 

With cable connection: Both units supplied by AC adapter.   

The last mentioned cable connection avoids battery wear-out and 
allows data transmission less prone to interferences.   

 

Putting into Operation  

For transmission security, first the remote temperature/humidity sensor 
and in immediate after the touch-screen weather station must be put 
into operation by power being applied to it. 
By doing this full scale operation of the total system of the touch-screen 
weather station is ensured.   

Summary of Contents for WS-3510




















Reviews: