background image

Model: BBB87740   www.lacrossetechnology.com/support      

Page | 1

  

Model:

 BBB87740 

Instruction Manual 

DC: 

121114

 

18” Indoor/Outdoor Atomic Wall Clock 

 

 

Get Started 

 

Step 1: 

Remove the round battery cover from the back of the clock.

 

Step 2: 

Insert 1 fresh AA, LR6 1.5 volt ALKALINE battery according to  

             the polarity marked on the case. Replace the battery cover. 

Step 3:

 Firmly press the time zone button once. 

Step 4:

 Position the clock on an exterior wall that faces Ft. Collins,  

             Colorado. During the night, your clock will automatically set itself. 

Note:

 The hands will move to the 12:00, 4:00 or 8:00 position and 

search for the radio signal. If the radio signal is received the time 
will set.  If the signal is 

not

 received the clock will stay at the 

12:00, 4:00 or 8:00 position and search for the WWVB time signal 
on the even hours. Once the radio signal is decoded, the hands 
will automatically adjust to the correct time. This may take up to 5 
nights. 

Step 5:

 The default time zone is Pacific Time. If the clocks sets itself and  

             the hours are off, hold the correct time zone button for 5 seconds  
             to correct. 

 

Position Clock 

 

 

Indoor:

 Choose a location 6 feet or more from electronics such as 

cordless phones, wireless gaming systems, televisions, microwaves, 
routers, baby monitors, etc., which can prevent signal reception. 

 

Position near an exterior wall that faces Ft. Collins, Colorado for 
WWVB time signal reception. 

Round 

Battery 

Cover 

Summary of Contents for BBB87740







Reviews: