1 / 4
66073-001
Rev 01
Z-Wave® Plus
Installation and User Guide
E
N
G
L
IS
H
If drilling a new door, use the supplied template and the complete
door drilling instructions available at www.kwikset.com/doorprep.
Note: Additional door preparation may be
required for doors with 1-1/2" (38 mm) holes.
Consult the deadbolt drilling instructions at
www.kwikset.com/doorprep.
or
bac
kse
t
Measure to confirm that the hole in
the door is either 2-1/8" (54 mm) or
1-1/2" (38 mm).
Measure to confirm that the backset is
either 2-3/8" or 2-3/4" (60 or 70 mm).
2-3/8" or 2-3/4"
60 or 70 mm
1-3/8" – 2"
35 – 51 mm
Measure to confirm that the hole in
the door edge is 1" (25 mm).
Measure to confirm that the door is
between 1-3/8" and 2" (35 mm and
51 mm) thick.
A
B
C
D
2-1/8"
54 mm
1-1/2"
38 mm
1"
25 mm
1
Prepare the door and check dimensions
Required tools
Ruler
4 AA Batteries
Hammer
Wood block
Phillips head screwdriver
Additional Tools (depending on application)
A
N or P
(2x)
N
P
S
Q
A
B
B
A
D
Is the door edge chiseled?
Which latch are you installing?
YES
NO
Use latch “A”. If the
latch bolt is not already
extended, extend the
latch bolt as shown.
wood
block
actual
size
Use latch “B” (not
included). If the latch
bolt is not already
extended, extend the
latch bolt as shown.
Latch “A”
Latch “B”
S
(2x)
C
Q
(2x)
Longer screws
install closest to
the door jamb.
door frame
E
Install strike on the door frame.
Make sure the hole in the door frame is drilled a
minimum of 1" (25 mm) deep.
or
chiseled
not
chiseled
or
2
Install the latch and strike
Kwikset
Technical Support
1-866-863-6584
www.kwikset.com
A
B
A
B
B
C
Is the D-shaped hole centered in the door hole?
Hold the latch in front of the door hole, with the latch
face flush against the door edge.
YES
NO
No adjustment is required.
Proceed to next step.
D-shaped hole
D-shaped hole
Rotate latch face as
shown to extend latch.
or
Latch
“B” is not included. If needed,
please contact Kwikset to order
a drive-in latch for your lock.
Strike
C
Keys
E
A
B
Exterior Assembly
Adapter
Ring
D
Mounting
Plate
Parts in the box
Fasteners
03809
46780
N
Q
S
P
48654
64109
T
V
49191
U
Contemporary
Interior Assembly
SmartKey
Tool
H
Traditional
M
M
Traditional
F
F
Contemporary
K
L
G
