Privacy
Levers
Passage
Levers
Emergency Unlock tool
(privacy locks only)
62878-003 Rev 03
Door edge NOT
chiseled
A
A
B
C
(2x)
or
E*
A
G
J
L
K
M
B
F
C
D
Adapter*
Parts in the box
Required tools
Latch
Strike
Screws
Not required for all applications
Allen wrench
wood block
Additional tools
(if needed)
or
Optional
Square Rose
Optional
Square Rose
Installation Guide
*Passage levers only: Call
Kwikset to order a service kit
for 2-1/4" (57 mm) thick doors.
2-3/8" (60 mm)
or
2-3/4" (70 mm)
1-3/8"–1-3/4"*
35 mm–44 mm*
2-1/8"
54 mm
1"
25 mm
Hold the latch in front of the door hole, with
the latch face flush against the door edge.
If the latch holes are centered in the door hole,
no adjustment is required. Proceed to step 3.
If the latch holes are NOT centered, adjust
latch. See “Latch Adjustment” (step 2C).
Latch Adjustment (only if needed)
Move the pin to
extend the latch.
not centered
centered
2-3/8" (60 mm)
2-3/4" (70 mm)
Backset
Centerline
1-
3/
8" (
3
5 mm)
1-
3/
4" (
44 mm)
2-
1/
4" (
5
7 mm)
Edge of the door
Fold
Drilling Template
Instructions continue on reverse
Template is only needed if a new hole must be drilled in the door.
Face of the door
Door edge chiseled
wood block
slant of latch bolt faces door frame
slant of latch bolt faces door frame
door frame
door frame
Remove plates.
Install drive-in
collar.
H
A
A
B
C
Prepare door and check dimensions
1
Adjust the backset of the latch (if needed)
2
Install latch
3
*Adapter only
included with
straight levers
