background image

Contents

I. INSTALLATION 

INSTRUCTIONS

1. Parts List and Tool Requirements  . . . . . . . . . . . . . . . . . . . . . . . . .6
2. Choosing a Location  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
3. Checking Cable Lengths  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
4. Mounting   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
5. Making the Connections  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
6. Testing  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
7. Auto-Compensation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Accessing Compensation Display . . . . . . . . . . . . . . . . . . . . . . . .19
Alignment Error Adjustment  . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Disabling Auto-Compensation  . . . . . . . . . . . . . . . . . . . . . . . . . .22

II. SAILCOMP 103AC FEATURES

1. Sailcomp Features  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
2. Damping Control  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

III. SAILCOMP 103AC MODES

1. Trend Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
2. Off-Course Mode  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
3. Nav Repeater Mode  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
4. Head/Lift Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
5. Starting Timer Mode  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
6. Switching Between Modes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

IV.  RACING WITH THE SAILCOMP

1. Shooting the Wind  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
2. The Starting Line  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
3. The Start  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
4. The First Upwind Leg  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
5. The Downwind Leg  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
6. The Second Upwind Leg  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

V. SPECIAL FUNCTIONS

1.  True North Capability  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
2. Warning Messages:

“Er1” & “Lo” “bAt”   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
“snr” & “oor”  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

VI. APPENDIX

1. Technical Specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
2.   Troubleshooting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 
3.   Wiring Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
4. NMEA 0183 Interface Output  . . . . . . . . . . . . . . . . . . . . . . . . . . .44
5. Nav Repeater NMEA 0183 Input  . . . . . . . . . . . . . . . . . . . . . . . .44
6. Compass Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
7. Warranty & Protection Plan . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
8. Remote Display Template  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
9. Remote Keypad Template  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

CONTENTS

Содержание Sailcomp 103AC















































Отзывы: