![background image](http://html1.mh-extra.com/html/kussmaul/091-31-12-115/091-31-12-115_installation-manual-and-manual_2012127001.webp)
TM
AUTO CHARGE 1
INSTALLA TION GUIDE & MANUAL
Visit: www.evpeurope.com
Call: +44 (0) 1926 419441
E-mail: [email protected]
EVP Ltd, Unit 4, Benford Court, Lower Cape, Warwick, CV34 5DA
Company Registration Number: 9121263
VAT number: 196484653
INTRODUCTION
The Model 091-31-12-115/230 automatic battery charger is a
completely automatic battery charger designed to charge
small lead-acid batteries at a rate of 1 ampere or less.
The unit is current limited to 1 ampere and provides a low ripple
charging current.
The charger will charge the batteries whenever their float
voltage drops. When the batteries are fully charged, all charging
stops. Any load applied to the battery when the charger is
connected and energized will automatically be supplied by the
charger up to the maximum 1 ampere capacity.
The Model 091-31-12-115/230 is factory set for 115VAC or
230VAC primary power operation at time of order. Please
verify that installation primary power and 091-31-12-115/230
input power requirements are correct prior to installation and
operation.
SPECIFICATIONS
•
Input:
115VAC or /- 10 volts, 50/60 Hertz.
Factory Set
•
Output:
DC, 13.25 Volts, Ripple: less than 100 mv Current:
0 to 1 amp depending on battery state of charge
• Input Wiring:
#18 AWG: Blue and Brown, Refer to Figure 1.
• Output Wiring:
Via P1/J1: Refer to Figure 1
• Power Indicator:
none
• Weight:
19 ounces
WARRANTY
All products of Kussmaul Electronics Company Inc. are
warranted to be free of defects of material or workmanship.
Liability is limited to repairing or replacing at our factory,
without charge, any material or defects which become
apparent in normal use within 3 years from the date the
equipment was shipped.
Kussmaul Electronics Company, Inc. shall have no liability for
damages of any kind to associated equipment arising from the
installation and /or use of the Kussmaul Electronics Company,
Inc. products. The purchaser, by the acceptance of the
equipment, assumes all liability for any damages which may
result from its installation, use or misuse, by the purchaser, his
or its employees others.
MODEL(S): 091-31-12-115 / 091-31-12-230
OUTPUT: 13.25 VOLTS DC, 1 AMPERE.
INPUT: 115VAC, 50/60HZ or 230VAC, 50/60HZ