background image

PRINTED IN THE USA © KUBOTA TRACTOR CORPORATION 2020 

     Code: 77700-05194 (Rev. K) 

 

INSTALLATION MANUAL 

DOME LIGHT (77700-VC5053, VC5053) 

KUBOTA RTV-X900, RTV-X1120D, RTV-X1140, RTV-XG850 

 

BEFORE INSTALLING DOME LIGHT 

 

Read all instructions and safety instructions in this manual. 

 

Refer to your machine’s operator’s manual and safety instructions on your 
machine’s safety decals. 

 

Wear appropriate personal protective equipment (PPE) when performing 
work. 

 

Disconnect negative (-) terminal on battery before performing work. 

 

Hang a "

DO NOT OPERATE

" tag in operator station. 

Estimated assembly time: 30 minutes 

This kit requires one of these Canopies to be installed: 

1. VC5000 Metal Canopy (Black)               2. VC5001 Metal Canopy (Orange) 

3. VC5011 Plastic Canopy (Black)             4. VC5043 Plastic Canopy (Black) 

5. VC5044 Metal Canopy (Black) 

 

NOT COMPATIBLE WITH: 

V5221 Canopy

 

NOTICE

 

 

The Dome Light is not rated for outdoor use. Use caution when washing the vehicle to not spray water directly at the 

light as this will reduce its life. 

 

Clean plastic lens and outer housing with mild soap and water. 

 

Avoid use of harsh chemicals on plastic as they may damage the plastic. 

Summary of Contents for 77700-VC5053






Reviews: