KTRL CD32, Quick Start Quide

Page: 1 / 3

KTRL CD32 G
AMEPAD
I
NSTRUCTIONS
I
NTRODUCTION
The KTRL CD32 gamepad is designed for the Amiga CD32 but it will also work on other
Amiga computers. The gamepad might work as a one button gamepad on other machines
using the Atari joystick interface, including the Commodore 64
1 .
The action buttons and [up/down 2 ] can be freely mapped between each other, they can
also be set up for turbo fire. This means that you can map the jump function from [up] to
an action button or you can rearrange the action buttons as you see fit.
You can also copy the functionality of one button to two (or more) buttons. As an
example: mapping the red action button to the right trigger will allow you to press either
the red button or the right trigger for the same function. If you then set up turbo fire for
the right trigger, the red button will behave normally and the right trigger will give you
turbo fire for the function of the red button.
The left, right and down and start buttons are not configurable.
U
SING THE
KTRL CD32
To be gentle to your old computer (and the KTRL CD32), you should only connect and
disconnect the KTRL CD32 while the computer is turned off.
The KTRL CD32 has an indicator LED that aids you in configuring it. When the KTRL CD32
is connected and you turn on the computer, the LED should blink three times to show that
it is working.
Every time the KTRL CD32 is turned on (automatically by the computer), the settings will
be set to default and the functionality will be identical to a standard Amiga CD32
gamepad.
M
APPING
B
UTTONS
To map a button, press and hold [select] , then press the button you want to map and
finally press the button you want to map to . The led will flash twice when mapped
successfully. As an example, to map [up] to the red button:
Press and hold [select], press [up], press [red], release [select]
You can map several buttons while holding [select], release [select] when you are done.
1 Like the original CD32 gamepad, this one will interfere with some keys of the keyboard on the C64.
2 Down can only be remapped on KTRL CD32 Rev. 2.