background image

CONTENTS:

PAGE 1

...................................

Important Safety Information

PAGE 2

....................................

Controller Quick Start Guide

PAGE  2

.........................................

Installation Requirements

PAGE 2–3

......................................

DC Cable Requirements 

PAGE  3–6

............................................................

Dispensing

PAGE  7

..........................................

Cleaning & Maintenance

PAGE 7

……………..........………….…………………………..

Fault Codes 

INSTRUCTION MANUAL

IMPORTANT SAFETY INFORMATION

WARNING

Read entire manual for important 

safety information before using 

your KRYO. Failure to follow warnings 

could result in injury & void warranty. 

Please read this entire instruction manual for important 

safety information prior to the use of your KRYO.

 

Failure to follow these instructions may result 

in injury and/or product damage and will void the product 

warranty.

GENERAL PRECAUTIONS:

  Avoid external heat sources such as direct sunlight, gas 

stoves, or other heat-generating appliances.

  Ensure that there is always at least 4" of clearance on each 

side of the KRYO to allow adequate airflow. Not allowing 

adequate ventilation will reduce performance, increase 

power consumption and void warranty.

  Only use approved cleaners and sanitizers to clean the 

product lines.  

  Do not set the temperature below 0°C/32°F or you risk 

freezing the beverage you are dispensing. 

  Only use on a flat surface or at a maximum angle of 20 

degrees off level.

  If using a 12V power inverter to power the NOMAD from 

your vehicle's 12V power outlet, never use an inverter rated 

to less than 500W power at 100% duty cycle.

1

Reviews: