![background image](http://html.mh-extra.com/html/kohler/9122a-4-cp/9122a-4-cp_installation-instructions_1988888001.webp)
All information is based on the latest product information available at the time of publication. Kohler Co.
reserves the right to make changes in product characteristics, packaging, or availability at any time without
notice.
Please leave these instructions for the consumer. They contain important information.
NOTES:
1. Flush the water supply pipes thoroughly to remove any debris.
2. An in line water filter must be used with this product.
3. Inspect the supply pipes for damage. Replace as necessary.
4. Observe local plumbing codes.
5. Check for leaks before covering the pipes. Repair as needed.
6. Recommended working pressure: 100KPa to 500KPa.
7. Maximum working pressure: 800KPa.
8. All installations should comply with the relevant requirements of AS/NZS 3500.
9. Inlet threads of the body are Rc 1/2.
1161638-AN2-B 28/04/16
Bath Mixer: 9122A-4-CP
BEFORE YOU BEGIN
INSTALLATION INSTRUCTIONS
ROUGH-IN DIMENSIONS
Wall Mount Single Lever Mixer
STANCE
BATH TAPWARE
1
SPARE PARTS
**Color code must be specified when ordering
1161638-AN2-B 28/04/16
4
Wall Mount Single Lever Mixer
STANCE
BATH TAPWARE
Bath Mixer: 9122A-4-CP
34263
O-ring
1141837
Mounting Plate
3008347**
Screw
834638
Hex Wrench
1132904
Washer
1133016-A**
Faceplate
832751
Screw
1132905
Washer
833730
Hex Wrench
1046290
Hex Wrench
3007001
O-ring
880084
O-ring
3002868
Washer
1142493
Aerator
Key
Aerator
880085
O-ring
834460
Valve
1032559
O-ring
3006328**
Nut
1133013**
Bonnet
1130088**
Handle
880002**
Plug Button Kit
Screw
1002015
1142102**
Aerator
Housing
1179019**
Aerator
Kit
1071996
Mounting Plate
1081338
Screw
841252
Washer
12º
213
48-58
230
83.5
102
125
42
114
RC 1/2
Hot
RC 1/2
Cold