background image

THANK YOU for purchasing this high-quality product. If you should experience a problem not covered in TROUBLESHOOTING, 
please visit our website at www.kitchenaid.com for additional information. If you still need assistance, call us at 1-800-422-1230. 
In Canada, visit our website at www.kitchenaid.ca or call us at 1-800-807-6777. 

You will need your model and serial number, located on the inside wall of the refrigerator compartment.

   

REFRIGERATOR SAFETY

Table of Contents  /  Índice / Table des matières

REFRIGERATOR SAFETY ............................... 1

INSTALLATION INSTRUCTIONS.................... 2

REFRIGERATOR USE...................................... 8

REFRIGERATOR CARE ................................. 12

TROUBLESHOOTING .................................... 13

WATER FILTER CERTIFICATIONS............... 15

PERFORMANCE DATA SHEETS .................. 16

WARRANTY .................................................... 18

SEGURIDAD DEL REFRIGERADOR............. 20

INSTRUCCIONES DE INSTALACIÓN........... 21

USO DE SU REFRIGERADOR....................... 27

CUIDADO DE SU REFRIGERADOR ............. 32

SOLUCIÓN DE PROBLEMAS ....................... 33

HOJA DE DATOS DEL RENDIMIENTO........ 36

GARANTÍA ...................................................... 38

SÉCURITÉ DU RÉFRIGÉRATEUR ................ 40

INSTRUCTIONS D’INSTALLATION .............. 41

UTILISATION DU RÉFRIGÉRATEUR............ 47

ENTRETIEN DU RÉFRIGÉRATEUR.............. 52

DÉPANNAGE .................................................. 53

FEUILLES DE DONNÉES 
SUR LA PERFORMANCE .............................. 56

GARANTIE ...................................................... 58

REFRIGERATOR USER INSTRUCTIONS

W10329364A

You can be killed or seriously injured if you don't immediately 
 

You

 

can be killed or seriously injured if you don't follow 

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety 
messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

Summary of Contents for KFIS25XVMS3









































Reviews: